Phillip_in_NM
Member
In considering a Quattro, I'm wondering if you have the choice of conductive or ferrous audio in all four modes or are you limited to certain types in certain modes?
Thanks,
Thanks,
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Question about conductive/ferrous
- Thread starter Phillip_in_NM
- Start date
Hi Phillip,
Normally your coin , coin & jewellery , are in the conductive mode.
Your relic & all metal are in ferrous. You can change all modes in
to what ever you like. If you would like to change coin to ferrous
just touch relic then push down on coin for a few seconds and it will change to ferrous. The same with coin and jewellery. With relic and
all metal just do it in reverse. To change to conductivity.
Regards Pinpointa Down Under.
smileawhile
New member
Hello,new with quattro not sure if I understand? why would you not
just use relic or all metal? holding down coin will change
what?? sorry don't mean to sound slowwwwwwwwwwww but I guess I
am LOL
Hi smileawhile,
When you are in conductivity in coin and coin & jewellery. you will get conductivity audio response and also have icons displayed on the screen.Its called cross saving.Turn the detector on ,select the coin search mode press and hold the on relics touchpad when you see saved
you have just changed conductivity to ferrous.It just means you can change the way you detect.It also makes the detector more versatile.
You need to read ANDY SABISCH book MASTERING THE QUATTRO. This format
is not in the MINELAB MANUAL.
Hope you get the gist of it now.
Regards Pinpointa Down Under.
smileawhile
New member
Well thank you ery much for the explanations I am going to order
mastering the quattro.
happy hunting
down under
mastering the quattro.
happy hunting
down under
Phillip_in_NM
Member
n/t
Smileawhile
Once you have changed the response setting there is a small Icon next to the mode button you are in by pressing the mode button it cycles through a check mark which is the factory setup and a human stick figure which is your user customized mode. If you see an asterisk it means you haven't saved your changes yet. Hope this helps. I am new to the Quattro also and really like it. Very powerful and easy to pinpoint. I use the wiggle method which works whether you are in pinpoint or not.
Once you have changed the response setting there is a small Icon next to the mode button you are in by pressing the mode button it cycles through a check mark which is the factory setup and a human stick figure which is your user customized mode. If you see an asterisk it means you haven't saved your changes yet. Hope this helps. I am new to the Quattro also and really like it. Very powerful and easy to pinpoint. I use the wiggle method which works whether you are in pinpoint or not.
Golden
Member
When using the conductive and ferrous tone settings, get use to the differences in pitch in the signals. There are many variations and with lots of use, you can learn to tell if the targets are good or bad. It's just one of the many facets to the detector that makes it interesting.
Golden
Golden