Keith Southern
Active member
some remarkable results from such a large coil in iron trash.No mind you it wasnt super dence trash since i had gotten most of the big iron out of there already but there was a scattering of nails and odd bits of iron.Didnt find nothing earth shattering. but what I did find was I could run the edge hotter on sens ? why I dont know I stayed around 9 all day and occasionally slid it up to 10 and it did'nt false hardly at all on the nails like the 8 inch does. and it has an uncanny ability to still separate as good or better than the 8 inch? (still up for debate on this).It wont separate like the 5.75 but how could it. But I believe it might do as well as the 8 plus get more punch.( More punch for sure)
Heres my take on the coils for the Edge.Remember I have just one day with the 10.5.
The 5.75 is the best in dense trash plus no more +/- 36 falses on deep nails.( I believe it does this because it's not seeing the deeper iron?)
The 8 inch has good depth but does false some on the deep iron but it easily Identified with a couple extra sweeps.Separates great for an 8 inch.( good general purpose coil)
The 10.5 has at least 2-3 inches more depth than the 8 inch retains the tight separation of the 8 maybe not quite but close need to experiment more but hardly any falsing on deep nails.( I believe it actually gets a better look on the deeper nails for more accurate I.D.? Again just speculation.)
One scenario is .The nail High tone falses in my area seem to be the ones that are about 10-12 inches deep.the ones the plows plowed under decades ago.The 5.75 just cant see them that deep and the 8 is just barely reading them and high toning them the 10.5 is reading them like the other coils read the shallower nails with a perfect I.D.
Another scenario is the 5.75 coil and the 10.5 coil look at the target different than the 8 inch does?
I belive that elliptical center on the 10.5 is doing something that the 8 dosent?
Need some more experimenting
Any thoughts..Any ideas .... Man yall gotta give that big coil a try if you have one.If you dont kellyco has them on clearance cheap!!! Gotta make it part of your arsenal.
Would like some feedback on the 10.5.
thanks
Keith Southern
Heres my take on the coils for the Edge.Remember I have just one day with the 10.5.
The 5.75 is the best in dense trash plus no more +/- 36 falses on deep nails.( I believe it does this because it's not seeing the deeper iron?)
The 8 inch has good depth but does false some on the deep iron but it easily Identified with a couple extra sweeps.Separates great for an 8 inch.( good general purpose coil)
The 10.5 has at least 2-3 inches more depth than the 8 inch retains the tight separation of the 8 maybe not quite but close need to experiment more but hardly any falsing on deep nails.( I believe it actually gets a better look on the deeper nails for more accurate I.D.? Again just speculation.)
One scenario is .The nail High tone falses in my area seem to be the ones that are about 10-12 inches deep.the ones the plows plowed under decades ago.The 5.75 just cant see them that deep and the 8 is just barely reading them and high toning them the 10.5 is reading them like the other coils read the shallower nails with a perfect I.D.
Another scenario is the 5.75 coil and the 10.5 coil look at the target different than the 8 inch does?
I belive that elliptical center on the 10.5 is doing something that the 8 dosent?
Need some more experimenting
Any thoughts..Any ideas .... Man yall gotta give that big coil a try if you have one.If you dont kellyco has them on clearance cheap!!! Gotta make it part of your arsenal.
Would like some feedback on the 10.5.
thanks
Keith Southern