Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Problem with digisearch meter..........
- Thread starter bottlebum
- Start date
meter and the coil cable receptical is loose and wobbles. Can anyone tell me how to tighten it?
adam in cal
New member
there is a nut on the inside of the meter, the screws are under the sticker on the faceplate near the corners, you may have to open it to tighten the nut, but first try to spin the concetor and see if you can tighten it that way, if that doesnt work you need to open the meter and tighten it that way .......
ejudasf
Active member
the wires will twist and may break.
It might be better to just open it up and tighten it right.
When you take off the plastic cover, it you get the 'sticky' stuff dirty, it might be better to just clean it all off with alcohol, and then get some spray on tacky stuff, and spray into a small cup outside. Then use a q-tip to apply to the area you need to stick. This way, it will be clean and look like you didn't open it.
good luck.
ed
It might be better to just open it up and tighten it right.
When you take off the plastic cover, it you get the 'sticky' stuff dirty, it might be better to just clean it all off with alcohol, and then get some spray on tacky stuff, and spray into a small cup outside. Then use a q-tip to apply to the area you need to stick. This way, it will be clean and look like you didn't open it.
good luck.
ed