Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
polar chart delay
- Thread starter old yank
- Start date
Larry (IL)
Well-known member
What do you mean by a long time........ seconds, minutes? Often, polar plot needs two passes over the target to get enough information to analyze. The continuous noise you hear in deep silver could be caused by many things, The most common is the gain and/or Disc sensitivity is too high for your ground. Have you tried reducing them and if so to what? Do your other programs work OK?
Neil in West Jersey
New member
Rob (IL) said:
The Threshold to be exact. If it is too loud, go to the Audio menu and lower it. I keep it just above a faint hum.
polar plot ,sizing and switching the toggle back to hunt from analize or pinpoint seems to take about 1 second to react, but instability wil cause analize to stay blank due to reaction time. im guessing thats just how it works. i also find it hard to analize in trash due to other close signals. right guys?
Larry (IL)
Well-known member
I would say that is an accurate statement. I don't use the analyze screen anyway because there is no more useful information in analyze than what I can get from the pinpoint screen, IMHO.
The Analyze Screen needs to have a period of time of no targets before and after seeing a target. So wait, thousand one, thousand two before sweeping the target and before re-sweeping the target. Pinpoint the target before analyzing. Off center sweeps can cause anomalous patterns.
Settings that are too hot can cause anomalous patterns or no patterns. Having your settings too hot may cause the analysis graph to trigger on ground. If there is enough noise to be triggering it within that required quiet time, then it cannot trigger to display the signal, or it triggers later and shows the wrong data. . If your noise source has signals that are as large as your deep targets, you will not be able to see a good reading either.
Settings that are too hot can cause anomalous patterns or no patterns. Having your settings too hot may cause the analysis graph to trigger on ground. If there is enough noise to be triggering it within that required quiet time, then it cannot trigger to display the signal, or it triggers later and shows the wrong data. . If your noise source has signals that are as large as your deep targets, you will not be able to see a good reading either.