HELP!!!!!
I went out with the GTI1500 and the
12.5 coil for a while. to places Ive had
success at before
The problems were many ....
The coil didnt want to pinpoint or image unless it
was 2 -3 inces OFF the ground it wouldnt pinpoint
like the std coil when i put it on the ground.
Everything showed as size c or e and either 1 in deep or
WAY down 12+
is there that much dfference between the std coil and 12.5?
i put sens to 3 because the machine kept beeping even while
it was on the ground motionless while i dug
Pinpoint SEEMS to be about in the middle to top of the
inner coil..
I know it will take some getting use to the size alone
makes it seem totally different ..
I changed to std coil and went over the same spots ....
got about 83 cents then it began to drizzle ..
am i THAT far off with the new coil?
Im not the mst experienced person for sure but GEEZ..........
I felt like a real newbie even worse than when i 1st
used the ACE..
Thank for any info guys
HH
Ron
Rangers Lead The Way
I went out with the GTI1500 and the
12.5 coil for a while. to places Ive had
success at before
The problems were many ....
The coil didnt want to pinpoint or image unless it
was 2 -3 inces OFF the ground it wouldnt pinpoint
like the std coil when i put it on the ground.
Everything showed as size c or e and either 1 in deep or
WAY down 12+
is there that much dfference between the std coil and 12.5?
i put sens to 3 because the machine kept beeping even while
it was on the ground motionless while i dug
Pinpoint SEEMS to be about in the middle to top of the
inner coil..
I know it will take some getting use to the size alone
makes it seem totally different ..
I changed to std coil and went over the same spots ....
got about 83 cents then it began to drizzle ..
am i THAT far off with the new coil?
Im not the mst experienced person for sure but GEEZ..........
I felt like a real newbie even worse than when i 1st
used the ACE..
Thank for any info guys
HH
Ron
Rangers Lead The Way