I have no less then 5 pinpointers of various makes and models at home presently, and about half of them still sort of work. They have split, cracked, gone out of tune permanently, quit beeping, quit vibrating and some only work on warm days. Turn down the temperature a few degree, and you might as well leave them at home, as they can't be tuned anymore. The ones that have to be tuned every time you turn them on have had their variable tuning knobs just plain wear out. Heck, I even built my own, tweaked it and it ran better then the others for about a year, but it eventually joined the rest in the "box" downstairs.
So, what makes this machine so good? NO MORE TUNING, first of all. The electronics do this automatically. No knobs to wear out. No retuning as the batteries weaken, or changes with the outside temperatures. And when you turn it on and put that probe in a hole to find that hidden coin, a slight BEEP and vibration is IS GIVEN OFF. And both intensify as you maneuver the tip towards that target. This machine goes DEEP! It picks up coins at a distance of about 3 inches, which means that I can quickly find that exact center of the target in seconds, if I can't get it manually with the search coil. Sometimes coins are on a steep angle, and the metal detector coil has difficulty finding the center of the target. Not the PRO-POINTER. It reads the coin directly below. If I couldn't pinpoint that coin with my screwdriver within 10 seconds, out came the PRO-POINTER and within seconds I had the target nailed. Another great feature of this pinpointer, is that it easily tracks the shape and size of the target. A strong vibration plus a strong audio covering a distance of 4" or more means it's a larger then coin size object, so it stays in the ground. If the target is a larger coin like a half, and its in the hole somewhere, but difficult to pinpoint....no problem. The PRO-POINTER can be de-tuned, just like a regular metal detector to make it less sensitive to the target, so it will only sound off when you are right beside it. NO MORE SCRATCHING SILVER COINS.
Ands it gets better yet......it doesn't interfere with the operation of metal detectors like some of the other electric pinpointers do. One particular model interferes with the operation of most of my detectors to the point where they almost become paralyzed. And......the output signal of the metal detector coil interferes with the automatic shutoff on the electronic pinpointer to the point where it won't shut off either. I actually have to remove the battery to shut it off........a great waste precious time towards metal detecting.
Now I just walk around with a screwdriver and probe in my hand, and leave the digger in the bag. About 80% of my finds from sports fields and schools can now be removed with the screwdriver in my hand, which acts as both a probe and removal tool. No more digging holes using my digger to see where the target might be. And this is a real bonus for working well manicured grass, as you can pull targets out of the ground leaving no trace at all. A great way to increase my finds.
And it was designed for the simplicity of the overall use. The 9 volt battery just "drops" in. No more of those cheap 9 volt battery clips to fight with. Simple turn on and go sequence saves a lot of time. You can either shut it off, or just leave it on and use as needed.
Finally, an electronic pinpointer to replace all the rest I have in the "box" downstairs. It really is an improvement on what is available today. And it's built tough!
I think Garrett has bragging Rites On This One. For further information, call a Garrett Dealer.
Gotta go with the Pro-pointer.....great warranty service too.