Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
pacemaker and ctx
- Thread starter DICKENS48
- Start date
Jason in Enid
Active member
I've got to say, this is the first time I've seen this question! I know there are a lot of different pacers and some do use wireless technology for doctors to see activity. I think this may be something you need to consult with your cardiologist about.
Here is what I have found about the wireless technology.....
Wi-Stream Specifications
Frequency: 2.4 GHz ISM band (same band as Bluetooth)
Power: <2 mW - transmit from both detector control panel and WM 10
Channels: 14
Connection type: Point-to-point - only one WM 10 can be paired with the detector at a time
Wireless compliance standards: ETSI EN 300 440-1: V1.6.1 (2010-0
Electromagnetic Compatibility with Radio Spectrum Matters
and ETSI EN 300 440-2: V1.3.1 (2008-11) Electromagnetic Compatibility with Radio Spectrum Matters
That is what your doctor would need to know to determine if it may interfere with pacemaker operations.
Here is what I have found about the wireless technology.....
Wi-Stream Specifications
Frequency: 2.4 GHz ISM band (same band as Bluetooth)
Power: <2 mW - transmit from both detector control panel and WM 10
Channels: 14
Connection type: Point-to-point - only one WM 10 can be paired with the detector at a time
Wireless compliance standards: ETSI EN 300 440-1: V1.6.1 (2010-0
Electromagnetic Compatibility with Radio Spectrum Mattersand ETSI EN 300 440-2: V1.3.1 (2008-11) Electromagnetic Compatibility with Radio Spectrum Matters
That is what your doctor would need to know to determine if it may interfere with pacemaker operations.
I don't have a pacemaker but do have an implanted defibrillator. I do have to stay away from high energy/magnetic fields, such as arc welding, etc. The only thing my cardiologist told me was to keep the coil at least 6" from the device. I've been using my detector for over a year without affecting the defibrillator. The best thing would be to talk to your cardiologist or the pacemaker manufacturer. Hope this helps.
GKMan
Well-known member
This is a good question. The American Heart Association actually mentions metal detectors in their pretty short list of devices that could interfere with a pacemaker (and also say it is unlikely to cause an issue). Obviously they are talking about airport type walk through metal detectors for the most but they also mention hand held security detectors...
If I was the recipient of a pacemaker I would be sure to not sit too close to it while doing some bench tests. After looking in to this I would be more concerned about the detector itself than the WM10 module causing an issue.
http://www.heart.org/HEARTORG/Conditions/Arrhythmia/PreventionTreatmentofArrhythmia/Devices-that-may-Interfere-with-Pacemakers_UCM_302013_Article.jsp
"Metal detectors for security: Interactions with metal detectors are unlikely to cause clinically significant symptoms in most patients. However, the American Heart Association recommends that you:
Don't stay near the metal detector longer than is necessary.
Don't lean on or stand against the system.
If scanning with a hand-held metal detector is necessary, tell the security personnel that you have a pacemaker. Ask them not to hold the metal detector near the device any longer than is absolutely necessary. Or ask for an alternative form of personal search."
Like someone else said I would suggest getting the all clear from the doctor..
If I was the recipient of a pacemaker I would be sure to not sit too close to it while doing some bench tests. After looking in to this I would be more concerned about the detector itself than the WM10 module causing an issue.
http://www.heart.org/HEARTORG/Conditions/Arrhythmia/PreventionTreatmentofArrhythmia/Devices-that-may-Interfere-with-Pacemakers_UCM_302013_Article.jsp
"Metal detectors for security: Interactions with metal detectors are unlikely to cause clinically significant symptoms in most patients. However, the American Heart Association recommends that you:
Don't stay near the metal detector longer than is necessary.
Don't lean on or stand against the system.
If scanning with a hand-held metal detector is necessary, tell the security personnel that you have a pacemaker. Ask them not to hold the metal detector near the device any longer than is absolutely necessary. Or ask for an alternative form of personal search."
Like someone else said I would suggest getting the all clear from the doctor..