Took the Outlaw out again today, and took it to an area that has lots of different soil types around the place, and this particular area is loaded with junk. After snagging a 2c coin (copper) at about 3" I decided to do some charry-picking. I had the 8" concentric coil on, and thought I would see how the Outlaw fared in all the trash with the disc. set reasonably high. I set the discrimination (after ground balancing) to just past the pulltab line, which still allowed $2, $1 and copper coins, together with some old silver coins and most silver rings able to register.
This Outlaw is a pleasure to use, and one smart machine. Trash close to the surface would initially register if it was large enough or close enough to the conductivity range where the disc level had been set. By raising the coil slightly, some of them would drop out (I know this feature is not exclusive to the Outlaw....my other Tesoros and some other brands do the same thing), but the Outlaw gives you the feeling that you are making the right identification (digging targets enabled me to check). The Outlaw signalled very well on good targets (coins), even though close to disced out targets, and this with the 8" coil. I was particularly impressed with its performeance in this regard, and I was able to snag 9 coins, including a 1938 1d. All targets were in the ground and varied in depth from 1" to 4". As I was detecting along a landscaped area where copper-treated pine longs had been used in the landscaping, I first found a 1c coin, then got a good signal next to one of the logs. I small silver (sterling) ring (1.80 gm) came out of the small hole I dug. It was mishapen, and part of the silver had been affected by its being next to the treated pine.
The Outlaw seems to pick up on targets, with good signals, in places where other detectors/detectorists apparently overlook them. I guess I can say the same thing about other detectors I have owned, but I have only used the Outlaw for a total of about 11 hours, and it has found 1 gold and 2 silver rings in places I know have, and continue to be pounded to death. The silver rings, judging by their depth and/or condition have been in the ground for years. The gold ring had been there for an estimated 18months to 2 and a half years.
Yesterday I met a mate at some goldfields, but it was too wet to be able to detect where he was going to take me. He has a Bandido II Umax, and wanted to try the 12 x10 DD coil on it. He was quite impressed with the weight of the coil and the clarity of signals it produced, and found a 1910 silver sixpence at a minimum of 6" (measured), and still got a clear signal. He then tried the Outlaw with the 8" coil, and I think I can say he was as impressed as I am with that combination.
After 11 hours of taking the Outlaw to some of my usual haunts, my takings (so far) are: 67 coins for $47.30 (Australian); 1 9k gold ring; 2 silver rings; 1 junk ring; and 1 junk earring. The 1938 Penny is the oldest coin I have found so far with this unit. The place where I live has an urban population of about 40,000.
The Sensitivity level for this last outing was set between 5 and 6.
This Outlaw is a pleasure to use, and one smart machine. Trash close to the surface would initially register if it was large enough or close enough to the conductivity range where the disc level had been set. By raising the coil slightly, some of them would drop out (I know this feature is not exclusive to the Outlaw....my other Tesoros and some other brands do the same thing), but the Outlaw gives you the feeling that you are making the right identification (digging targets enabled me to check). The Outlaw signalled very well on good targets (coins), even though close to disced out targets, and this with the 8" coil. I was particularly impressed with its performeance in this regard, and I was able to snag 9 coins, including a 1938 1d. All targets were in the ground and varied in depth from 1" to 4". As I was detecting along a landscaped area where copper-treated pine longs had been used in the landscaping, I first found a 1c coin, then got a good signal next to one of the logs. I small silver (sterling) ring (1.80 gm) came out of the small hole I dug. It was mishapen, and part of the silver had been affected by its being next to the treated pine.
The Outlaw seems to pick up on targets, with good signals, in places where other detectors/detectorists apparently overlook them. I guess I can say the same thing about other detectors I have owned, but I have only used the Outlaw for a total of about 11 hours, and it has found 1 gold and 2 silver rings in places I know have, and continue to be pounded to death. The silver rings, judging by their depth and/or condition have been in the ground for years. The gold ring had been there for an estimated 18months to 2 and a half years.
Yesterday I met a mate at some goldfields, but it was too wet to be able to detect where he was going to take me. He has a Bandido II Umax, and wanted to try the 12 x10 DD coil on it. He was quite impressed with the weight of the coil and the clarity of signals it produced, and found a 1910 silver sixpence at a minimum of 6" (measured), and still got a clear signal. He then tried the Outlaw with the 8" coil, and I think I can say he was as impressed as I am with that combination.
After 11 hours of taking the Outlaw to some of my usual haunts, my takings (so far) are: 67 coins for $47.30 (Australian); 1 9k gold ring; 2 silver rings; 1 junk ring; and 1 junk earring. The 1938 Penny is the oldest coin I have found so far with this unit. The place where I live has an urban population of about 40,000.
The Sensitivity level for this last outing was set between 5 and 6.