old white coinmaster 6000/D

[cory in fla]

I have an old whites coinmaster 6000/D that i I've had for years it was my dads,since he passed i really have not used it much and so just pulled it out of the closet and want to start using it more often since i got back in to mding.i been using a ace 250 but i was just wondering if it was a good detector at least back in it day? any one still use the 6000/D and how is it as far as the depth goes ?

 

[clondike clad]

That old detector can go very deep I had one for years.
Dimes at 7 inch eazy.

 

[jmaryt]

cory!..the 6000d was a wonderful detector!..it was a fast sweeper in that you had to sweep the coil quickly to properly discriminate with it!..it was an early (v.l.f) design that ushered in a series of detectors that culminated with the introduction of the best coins sniper ever built in my opinion,the legendary xl-pro!.the 6000d was the first,followed quickly by the 6000 series 2,and then by the 6000 series 3,and then by the 6000 di pro!..all of these detectors used similar circuit designs upgraded over the years,and finally ending with the xl-pro!

(h.h!)
j.t.

 

[cory in fla]

I guess I'm going to have to break it out and use it and see what it can do just did not use it that much because it starts getting a little heavy on the wrist after a while!! thank for the info and the reply backs...

 

[jmaryt]

you are welcome!.you can really "snap" the 6000 back and forth pretty good!..best of luck with it!
(h.h!)
j.t.

 

[Elton]

Order a hip mount kit from Whites.............Just tell them you have the wide body and it's work great, You also need the kit for the extension rod.
I used one and found many many pieces of Silver with it. I would say about 6" was max in my area, but who knows that was here,you are there....
Good luck with your return to the hobby.........

 

[tab-nabit]

I had the 6000 Di Pro for years and have put more hours into it than all my other machines combined.
I don't how much difference there is between the 6000/D and 6000 Di Pro, but if they are close I think you will really enjoy it. I let mine go recently and don't really know why now - kick myself again and again.
Learn the audio well and watch for certain needle flicker and work moderate to fast in disc or moderate in AM.
8 inch and 4 inch coils. A fine analog meter that is accurate and worked consistently well.
One of the finest Whites I had ever used and it served me very well for many years.
I have a half dozen new tech machines but get the urge for the XL Pro or something similar.

 

[jmaryt]

very similar in peformance to the xl-pro!..the pro is better balanced and lighter over all!..also the pro uses updated surface mount components on the circuit board
thus making the detector quieter,and smoother.,,translats to better overall performance!..if you can find an xl-pro,GRAB it!..you will love it!

(h.h!)
j.t.

 

[silvernail]

Monte has posted some wonderful material on the 6000 series here in the past. Try the "Search" at the top of the page and type in "Monte white's 6000" or similar. As I recall, if it was a "Coinmaster" it probably had the old white 8" coil as stock, and the "Coinmaster" designation was dropped when they went to the Blue Max 9.5 inch coil, among other things. HH

 

[Boogeyman]

[size=x-large][/size]STILL ONE OF THE BEST BACKUP MACHINES around!!!
[attachment 73051 PB140007.JPG]

[attachment 73053 PB140008.JPG]

[attachment 73054 PB140009.JPG]

 

[jmaryt]

i agree!..had one in the eighties,and really found a "ton" of goodies with it!..the xl-pro evolved from it!.."crackerjack" meter.and really "dead nuts" accurate!

(h.h!)
j.t.

 

[johnandcol]

I have my father's old 6000D but the battery leads have broken off.
I need a pic to help me re-solder them back. Any help appreciated

 

[Mainer]

I still have my 6000 series 2 that I bought new in 1982 and have put countless hours on it and it has never skipped a beat. I can't begin to tell you how much stuff it's found over the years. I have had many other detectors since but have always kept this one just because I like it. I love the full, rich audio these machines were noted for. I have several other newer machines but I still like to take the "old girl" out for a walk from time to time. White's still has parts for them and there are a lot of coils and accessories out there at really reasonable prices. A little heavier than todays offerings but not excessively so. The 6000 line culminating in the XL Pro are truly outstanding machines, even today. A real class act in my opinion. Keep it and enjoy it!!

 

[Dennis Harbour]

I had one> You can hunt in all metal (GEB NORMAL or GEB MAX) and get asignal, press the push button it goes into motion discriminate while pushed in. If your mode is in GEB dixcriminate, it goes into GEB normal while pushed in. You can also use the TR disc for 'reverse discrimination'.

 

[Fisherfinder]

What frequency do these units use?


.

 

[sailormike]

Hey folks,
I'm very new to this hobby and board and really having fun with it, I'm hooked! A friend just gave me a 6000 di series 3. I'm have a bit of an issue that just acts like a simple loose connection somewhere and have a suggestion to try fro?m another thread. Anyone ever had a similar problem
Also, to "Boogeman" in your pic you have an arm cup and shoulder strap for he box. Is that a custom mod or off the shelf? I like it!!

 

[a4wdguy]

Is this loose connection symptom concerning power, or signal?
If you are intermittently losing power, check the battery terminals to ensure they are in place and clean, and then check the spring loaded battery contacts inside the control box to ensure they are clean, straight, and not pushed back.
Many people have a habit of dropping the battery pack into the detector, which over time will push the contacts back, causing loss of power.
The hipmount setup was an option. Kind of like buying a car in either hard top or convertible. You could buy a detector configured for hand-held or hip mount. After market (and manufacturer supplied) conversion kits were and are available. IMHO conversion kits weren't quite as good.

 

[sailormike]

Hey thanks,
Yeah checked power supply, good. Checked the stacked circuit board, good.
Not sure what is going on. Once it starts working it usually stays on. Ill keep playing and keep posting. Thanks for the support
And I must apologize because I feel like I have hijacked someone elses thread. I thought we were having the same problem and hope we both benefit from the responses.
Sorry bro.

 

[TC-NM]

What frequency do these units use?


.

6.592 kHz.

 

[robert lamm]

what settings to use on coinmaster6000 d to detect gold and silver