Folks I have a Fisher ID Edge, in the most pristine condition you will find short of buying a sealed box. I purchased it new last year, and put all of about 8-10 hours MAX on it. It's a great machine, co-designed by Bill Ladd, and THE lightest Fisher F series machine made to date weighing in at only 2.75lbs, you really can swing this all day long!
Thanks to Bill Ladds help, it comes with a "old coins" "modern coins" and "Jewelry" program and can also be programed with a custom program.
The coil has an extra long cable because the control box can slide off the pole and has a built-in belt clip in case you want to use it as a fresh water machine. It's still to this date one of the best machines in iron, has plenty of depth, lightening fast target processing/separation, full LCD display, notching, four tone audio, 36 point iron display, ground grab ground balancing, last setting memory, the works.
This machine also has an OPTIONAL Sunray CS-1 Probe. This probe is special, because (to the best of my knowledge) it is the only Sunray Probe that will allow you to use coils from another machine with the flip of a switch! In this case, it will allow you to use the coils from the Coinstrike, and it just so happens that I have both the 5.75" and 10.5" coils that I can sell too.
So here's the deal:
For $400 shipped you get a basically brand spanking new (still even has the protective plastic on the screen) Fisher ID-Edge, with the original manual, user registration card, and factory box PLUS the Sunray CS-1 Probe shipped to your door in the con-USA! US Postal MO preferred, but will take paypal for $415 to cover paypal charges.
If you don't want the Sunray Probe, subtract $50.
If you buy the ID Edge and Sunray Probe I will offer the optional coils to you at the following prices:
5.75" coil - $75 shipped
10.5" coil - $70 shipped
Take everything, and it's yours for $525 to your door with USPS MO, or $550 via paypal.
I've traded with several folks on this forum, so rest assured I'm an honest trader (ping me if you'd like references).
First person to post they'll take it AND email me gets the machine.
You're going to love it, it's a great unit, I just need to thin the collection out a bit, I'm up to my eyeballs in tectors
Bill Ladd's field report can be found here:
http://www.metaldetector.cc/ProductImages/fisher/IDEDGE_FIELDTEST.pdf
Thanks to Bill Ladds help, it comes with a "old coins" "modern coins" and "Jewelry" program and can also be programed with a custom program.
The coil has an extra long cable because the control box can slide off the pole and has a built-in belt clip in case you want to use it as a fresh water machine. It's still to this date one of the best machines in iron, has plenty of depth, lightening fast target processing/separation, full LCD display, notching, four tone audio, 36 point iron display, ground grab ground balancing, last setting memory, the works.
This machine also has an OPTIONAL Sunray CS-1 Probe. This probe is special, because (to the best of my knowledge) it is the only Sunray Probe that will allow you to use coils from another machine with the flip of a switch! In this case, it will allow you to use the coils from the Coinstrike, and it just so happens that I have both the 5.75" and 10.5" coils that I can sell too.
So here's the deal:
For $400 shipped you get a basically brand spanking new (still even has the protective plastic on the screen) Fisher ID-Edge, with the original manual, user registration card, and factory box PLUS the Sunray CS-1 Probe shipped to your door in the con-USA! US Postal MO preferred, but will take paypal for $415 to cover paypal charges.
If you don't want the Sunray Probe, subtract $50.
If you buy the ID Edge and Sunray Probe I will offer the optional coils to you at the following prices:
5.75" coil - $75 shipped
10.5" coil - $70 shipped
Take everything, and it's yours for $525 to your door with USPS MO, or $550 via paypal.
I've traded with several folks on this forum, so rest assured I'm an honest trader (ping me if you'd like references).
First person to post they'll take it AND email me gets the machine.
You're going to love it, it's a great unit, I just need to thin the collection out a bit, I'm up to my eyeballs in tectors
Bill Ladd's field report can be found here:
http://www.metaldetector.cc/ProductImages/fisher/IDEDGE_FIELDTEST.pdf
