Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Minelab making EQX coil ears thicker ??
- Thread starter squirrel1
- Start date
There are slide over available. I have a set I ordered from a guy in Russia but they are shipped from Texas.
they slide over the existing ones and support the ears from th out side of them.
no matter if you have them in either case when you tighten the nut the ears will bend and too tight SNAP,.
So never tighten them up , just snug them up. Be very careful.
Doug
they slide over the existing ones and support the ears from th out side of them.
no matter if you have them in either case when you tighten the nut the ears will bend and too tight SNAP,.
So never tighten them up , just snug them up. Be very careful.
Doug
Never broke mine but I put the stablizer on just for safety. I‘ve been detect for over 45 years and have never broke an ear on any of my detectors And they don’t break just sitting their so if broken it’s not the detector that did something wrong.
Their delicate so treat them that way. I have always been careful with my detectors.
Doug
Their delicate so treat them that way. I have always been careful with my detectors.
Doug
romanceferris
New member
can you share a picture of the stabilizer please. possibly some more information on it
RavRad
Active member
This is what they are talking about: https://www.thingiverse.com/thing:3949618
It has to be 3D printed. Most local libraries have 3D printers. There is a couple posts on Friendly's forum where someone was making them for the cost of shipping also.