Lower rod question

[Ex-Sox]

Will the older XS and EXII lower rods work with my SE and Etrac? Thanks

 

[davew0710]

You need to be careful. Some of the models are interchangeable and some are not. When I wanted to get an extra shaft, I checked with Kellyco and they told me which ones would work. Look at their website and look under accessories for the E Trac and the have a chart of the various shafts and what models they work with.

 

[thedeserttortoise]

Just a quick heads up. Lower rods can add up. I added a Sunrey probe to my Etrac and just change coils and plug directly into it. The wire is back on the outside which dosent cause any trouble for me. Its just an idea. A lot of people have bought the Etrac for the feature of the coil lead being enclosed. I have a couple of shafts from before the Sunrey and still use them on the bigger coils anyway. Especially a WOT I have that never mounted clean in the first place. I'll never remove that from its shaft after I finally mounted it half way straight. Good luck. Tortoise

 

[Hillbilly Cat]

If you locate the model number, cross reference to the other shafts I think you will be fine. TCB!!!