Love the v3 but can't seem to find out how to change the coin program to vco when pinpointing?

[DavefromCt]

Thanks ....I can't seem to understand how to change some things even after looking at the manual. I used to have the dfx...it seems harder with the v3 to get into the right menus etc....just a mental block perhaps!

 

[ak_1234]

There are 2 possible ways to get into this function - either by going into the expert menu (press menu twice, then scroll down to the expert menu option which will then take you to the expert menu) or by zooming in to the audio live control while you are in the search screen. I'll go with the latter. Start in the search screen, and scroll over to the audio live control using the right or left arrow keys. When the audio live control is highlighted, press the zoom key. This will bring up the same menu as you would see in the expert menu. Scroll down to pinpoint audio and press enter, and you should see the option to enable or disable the VCO. Scroll to the VCO option and press enter.

Hope this helps

 

[DavefromCt]

Ok, I got it! Thanks for the advise!.....I love using the vco for pinpointing.