Loose control box?

[scdigger]

Hey guys,

The contol box on the handle of my F75 seems to be a bit loose...can it be tightened? I didn't want to go around exploring inside.

Greg

 

[Jigflipper]

n/t

 

[Tinfoil]

n/t

 

[Jigflipper]

n/t

 

[scdigger]

n/t

 

[Tinfoil]

n/t

 

[19beavers]

I have the same problem - anyone fixed it themselves ?

 

[tink]

Just sent mine in this moring to Fisher Labs. That was one of the things I asked Felix about and he said write it down. From my inderstanding, and I could be wrong as usual, they swap out the control box when getting the upgrade. Hopefully this will fix the problem. Mine jiggles when ever I swapped coils and always worried me it was going to come off. Hey, maybe they'll replace the plug connector too. That thing is super tight and still the connector seemed loose. You touch the coil wire or cinnector it reacted easily to it.

 

[loadin2]

Mine was loose for a while too...all I did was slide the foam on the handle down a bit and there is a small phillips screw that sets right at the top of the handle...mine was loose so once tightened it fixed the problem. Hope this helps