Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Kruzer tone break/frequency in 4 tone?

P

pine3874

Well-known member
When using 4 tones on the Multi Kruzer can the tone break and tone frequency be adjusted for all 4 tones?
 
Coin Rescue Inc said:
I read the Manual again and the answer is yes to both of your questions.
Click to expand...

I can't find any place in the manual where it shows how to change the tone break of the 4th tone. It's possible to change the tone frequency of the 4th tone, but don't see anyway to change the tone break of the 4th tone.(In other words, 66-100 can't be changed) At least that's the way I see it. If you already have your Kruzer, please see if you can change the tone break of the 4th tone. Thanks
 
Here is one note from the manual for adjusting the 4th tone

NOTE: If you want to change the frequency of the 4th tone in the 4 TONE mode, while Non-Fe is selected, press the SELECT button once. The frame will disappear and the audio frequency of the 4th tone will appear on the screen. use the (+) or the (-) button to change it.
 
After looking through the manual I would think you can change the tone break.
It says something about up to 3 tone breaks depending upon mode.
Remember that 4 tone mode only has 3 tone breaks,
3 tone mode would have 2 break points,
2 tone only 1 tone break.
 
Yes,

I see on my unit in 4 tone mode there are only three points to change

the 3rd one separates 3rd tone and 4th tone.

Default point is 66. I moved it up and down back to default position.
 
Thanks for the report.

Looking forward to taking mine out when I get home in two weeks!
It's due to arrive Monday., but I doubt it'll show up before I leave for the airport.
:jump: I'm gonna be itching to dig when I get back!
 
I just tested adjusting the tone audio frequency in 4 tone

Low default is 15 - it can be moved up or down

Med Low Default is at 33 -can move up or down

Med High Default is at 45 - Can be moved up or down

High default at at 64 - it can only go up to 70 as advertised

So no worries i see
 
You must log in or register to reply here.
Top