Keeping the machine from falling over

[jeff & Maria]

Since a lot of you guys were asking about these anyone interested in these for the X Terra let me know. It replaces the lower stand and uses the same screw. I have some to sell.

 

[jeff & Maria]

n/t

 

[xwyokid]

How much weight does that, (Harris?) bipod add?

 

[Canewrap]

I wonder the same, but if its around 8 oz. then I'm golden. I noticed that if you add about 8 oz. to the back end of this detector it swings a whole lot better with the stock coil and the 10.5" DD coils.

 

[xwyokid]

I wonder the same, but if its around 8 oz. then I'm golden. I noticed that if you add about 8 oz. to the back end of this detector it swings a whole lot better with the stock coil and the 10.5" DD coils.

I agree. I have a couple of those bipods around but they are the ,"longer version"and certaintly weigh more than 8ozs. They are also expensive, ($40-$70). However, this appears to be a very good idea and sometimes you can find these bipods at yard sales at very good prices.

 

[Bavaria Mike]

and I'm sure it works well but, looks like to much hassle to use. I just heated up the stand fins with a heat gun and bent them out about 1" on each side, worked very well for me. You won't get rich from that idea but I will give you fame in the form of ingenuity, nice job! HH, Mike

 

[Beale]

Very nice idea! I like it a lot! I am wondering as to the cost? Thanks in advance, Beale.