Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

ID Edge on the way, any tips??

I a thr

I a thr

Member
Got a new C$ a couple months ago. How is the Edge in comparison for searching old farm sites and such for coins. I have read the owners manual and all of the field tests and sounds encouraging. Does anyone use the OC factory preset? Any tips would be appreciated. Sound like the setup is somewhat similar to the C$..
Thanks,
Bill
 
Hi Bill,

The main thing to pay attention to is getting a good ground balance. If its not handling iron well in those fields, re-ground balance and try again. Thats the biggest difference between the Edge and the CS IMO. Around iron I let the tracking set the GB on the CS and then locked it in(usually). Sometimes with the Edge ya gotta play with the GB a bit to get the best performance, especially in low iron mineral ground where it seems to set a too negative balance on occasion.

Dropping the sensitivity to GB can make a big difference at some sites on depth and iron handling. Sometimes it seems to want a little more than a 2 second count before raising the coil as well. Play around with it some.

Tom
 
n/t
 
Bill,

You can check the GB in all metal auto-tune with max sensitivity by bobbing. Let me know how it goes too as I am wondering about my 8" coil... so far the 5.75 balances nice first time every time.

Tom
 
after you ground bal. try turning up the sen. some to add a little more depth,it wont always work but in some ground around here I've hit pennys at 7 to 9 inchs and qtrs at over a ft. good luck and keep us posted
 
I will sure give it a try. Appreciate any tips!!! Just got the Edge today so will be out giving it a run..
HH
Bill
 
This park is an old park thus just full of trash and bottle caps. I have been over the park with several different detectors and my most recent was the C$. I would bet I found over 200 bottle caps in about 5 outings with the C$. I did find a few old coins with it, 1897 O dime, 6 IH's, 1959 Washington Quarter, & numerous Mem Pennies and clad coins. I guess the discouraging part was all of the Bottle caps I had to dig to get the coins. Well today I took the new ID Edge to the trash park and only found 1 IH, 1905, 5 mem pennies and a clad dime, but didn't dig 1 single bottle cap, not even 1. I am happy and think I'm going to enjoy using the Edge. Today I ran with the small coil and ran disc at 18. Set the GB with sensitivity at 2 and after setting cranked the sensitivity to 9 and ran sweet. It appears it may have earned a spot in my arsenal of keeper detectors. The jury is still out on the C$ until I get to use it this Fall in some old plowed field sites.
HH
Bill
 
I would guarantee 15 to 20 with the coinstrike in a 3 hr hunt.
 
You must log in or register to reply here.
Top