I need help

[jeffwv]

I finally got a perfect disc pattern to detect a really trashy spot and did OK today but when I thought it was saved in S-1 I went to reload it and the presets were there. I am very good with Cortes but the EX II seems to be stubborn. Thanks, Jeff

 

[Captain Kirk]

n/t

 

[Arturo de Zorro]

After you have made your program either in the Learn or Edit screen, press the detect button till you see the Learn screen now you press the bottom right arrow where you see the open box on screen to send it to the save screen then you select which of the six save boxes you want it in, then go back to detect. When you are ready to load one of your save programs you can push the Menu button then press save just to see what you have saved and remember which box its in, now press the Menu button to the main menu then press the Select screen then this is where it GETS TRICKY, you must always select Clear to remove your present hunting program that is shown at the top left, then go down to to the S programs you have saved, then select the one you had viewed earlier and it will have a check mark if its not the one you want click it again you will see a X and one more click to clear and now you can pick another S program. Now just press Detect and your ready to hunt, you can make adjustment to this program as you go along with you hunt but they will not change the original save box, If you want to change the original save box to your new adjustment start with the Learn screen and start all over.