i asked this question on the mods forum also

[GraveDiggerMax-VaBch-Va]

i want to switch coils on one of my excal II's and add 12" sunray S-12

pictured is S-12 wires on left side

minelab coil wires on the right side

sunray has two white wires, inside one is red and all metal wire

the other is clear looking plastic coated and all metal wire

the excal coil wire has four wires, black, red, yellow and white

i need a class on whick wire goes to which

thanks

max

 

[Sanddigger]

n/t

 

[deerman]

max you should be able to check the wires by a meter by putting one lead (red)on the red wire and check to find the other end with the black lead by touching the wire the reading should read O/L
for open line or a number (anything from 0-? means you found the other end should have two sets of wires transmit and recrieve as long as you know where the wires went on the excall you should be able to
find the correct way to hook em up hope this helps