Hi Tony,
If you have Andy's book it gives an illustration of how to load a coin program. If you don't have the book, take your machine and make sure that it is away from all targets. Press the detect button to go to the Advanced Learn mode. In the Advanced Learn mode push the button next to the check mark on the screen, pass any coins over the coil that you want to find until they no longer give a signal(you should have some silver coins to do this with) after you have passed all of the coins over the coil press the button on the lower right corner of the screen. This is the save button it will bring up the 6 save positions and you can choose one of these to save your pattern. To load this pattern if it is ever changed press menu, then select, press the CLEAR button to clear the screen on the top left. Use the left bottom button to scroll down the list until you get to the saved position that you are looking for and then press the button next to the that position, it will show on the screen to the top left, press the detect button and the pattern will be loaded. Hope this helps. Butch
