hi all im from England and have good history in mine and my friends permission but cant help thinking that im setting up wrong I have got from an ace 250 to a teknetics g2 I dnt really know what im doing with it dnt actually know the dials and buttons do so if someone could put it lamen terms so its easier to understand I would be very greatful. currently turn left dial to 12o.clock position then the right to about 12 then ground balance switch right dial off then press right arrow to 39 then turn left dial to 85-100 hope you can make sense of that thanks in advance
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
help!!!!!
- Thread starter scottuk
- Start date
Digger70pa
Well-known member
Read the instruction manual friend. The G2 is very simple to set up & make great finds with.
EtracTom-AdirondacksNY
New member
Sounds just perfect what you do as described.
Left dial is sensitivity/gain turn on to start at 12 o'clock position.
Right dial you have in ALL METAL then turning knob to the right after passing the click point you are now in all metal stop at the 12 o'clock position and then you pump the coil up and down to ground balance and the number on the screen is the ground balance number. I believe you can change it with some arrows on the face of the machine up or down as needed.
Then by turning the right knob all the way to the left till it clicks and it's now in the discrimination mode. Pushing the right arrow dials up the TONE BREAK POINT so low iron grunting sounds is 39 and under and VCO higher sound is 40 to 100.
Turning up the left knob to the right further till 100 increases the sensitivity.
Left dial is sensitivity/gain turn on to start at 12 o'clock position.
Right dial you have in ALL METAL then turning knob to the right after passing the click point you are now in all metal stop at the 12 o'clock position and then you pump the coil up and down to ground balance and the number on the screen is the ground balance number. I believe you can change it with some arrows on the face of the machine up or down as needed.
Then by turning the right knob all the way to the left till it clicks and it's now in the discrimination mode. Pushing the right arrow dials up the TONE BREAK POINT so low iron grunting sounds is 39 and under and VCO higher sound is 40 to 100.
Turning up the left knob to the right further till 100 increases the sensitivity.