Ytcoinshooter
Well-known member
ELIMINATOR LOOP
Info from the original sales literature is in quotes at the end. This is a high performance co-planer aka double stacked coil. For Whites 6.59 kHz detectors like XLT, IDX, quantum, XL Pro, old Di's like 6000 and 5900 models and more. There never was a coil cover made for these so I fashioned one and it is on with GE silicone and can be removed, the stuff remains flexible and peels off. I asked the manufacturer when I bought this coil new and they said what I did was a good idea. Comes with lower rod, clevis and loop support bracket. It is guaranteed to work. The coil wire is extra long for hip mounting your detector.
When I attached the cover with silicone I put some on the seam. That wasn't necessary and can be peeled off.
I sold my last Whites that uses the 6.59 frequency so I'm offering this up.
$85. shipped to the lower 48 states.
HH - Bruce
"Another special purpose Applied Creativity loop, designed to eliminate signal interference from 60 cycle transformers, high tension wires, radio frequency and other metal detectors. Because of its size, this six inch loop works great in high trash areas and easily matches the depth of 8 inch plus loops. In fact, in harsh environments it gets much greater depth than your standard loop because it has the ability to operate at a higher sensitivity level with less interference. It doesn't lose coins on edge and pin-pointing is a breeze. It's very sensitive to tiny targets and its ability to handle bad ground mineralization makes it a good prospecting loop. When used in the "all metal mode" this loop does not detect from the top of the coil, thus it can be used under metal fences and playground equipment. When you see it, don't be alarmed by the thickness. That's what makes it work! It is designed for use on White's Pro's, Eagles, Quantums & Spectrums.
oop Item # JS-E6 $159.95"
"Dear Jimmy,
I'm having great success with your Eliminator loop. I'm finally able to hunt in some areas that were previously difficult to hunt because of power lines. Prior to using this coil the interference made it either unhuntable or made me reduce the sensitivity so much there was no chance of finding the deeper coins.
Also there's no more interference from the other guys in our club that have other White's detectors. Finally I can hunt and pinpoint in peace. The Eliminator makes my time more productive in the field.
I found a 1908-S Indian Cent. It was 6 inches deep and tilted. My partner's high-end detector couldn't pick it up. I had the smuggest look on my face."
Info from the original sales literature is in quotes at the end. This is a high performance co-planer aka double stacked coil. For Whites 6.59 kHz detectors like XLT, IDX, quantum, XL Pro, old Di's like 6000 and 5900 models and more. There never was a coil cover made for these so I fashioned one and it is on with GE silicone and can be removed, the stuff remains flexible and peels off. I asked the manufacturer when I bought this coil new and they said what I did was a good idea. Comes with lower rod, clevis and loop support bracket. It is guaranteed to work. The coil wire is extra long for hip mounting your detector.
When I attached the cover with silicone I put some on the seam. That wasn't necessary and can be peeled off.
I sold my last Whites that uses the 6.59 frequency so I'm offering this up.
$85. shipped to the lower 48 states.
HH - Bruce
"Another special purpose Applied Creativity loop, designed to eliminate signal interference from 60 cycle transformers, high tension wires, radio frequency and other metal detectors. Because of its size, this six inch loop works great in high trash areas and easily matches the depth of 8 inch plus loops. In fact, in harsh environments it gets much greater depth than your standard loop because it has the ability to operate at a higher sensitivity level with less interference. It doesn't lose coins on edge and pin-pointing is a breeze. It's very sensitive to tiny targets and its ability to handle bad ground mineralization makes it a good prospecting loop. When used in the "all metal mode" this loop does not detect from the top of the coil, thus it can be used under metal fences and playground equipment. When you see it, don't be alarmed by the thickness. That's what makes it work! It is designed for use on White's Pro's, Eagles, Quantums & Spectrums.
oop Item # JS-E6 $159.95"
"Dear Jimmy,
I'm having great success with your Eliminator loop. I'm finally able to hunt in some areas that were previously difficult to hunt because of power lines. Prior to using this coil the interference made it either unhuntable or made me reduce the sensitivity so much there was no chance of finding the deeper coins.
Also there's no more interference from the other guys in our club that have other White's detectors. Finally I can hunt and pinpoint in peace. The Eliminator makes my time more productive in the field.
I found a 1908-S Indian Cent. It was 6 inches deep and tilted. My partner's high-end detector couldn't pick it up. I had the smuggest look on my face."