Terrytorment
New member
It can do the job on tiny hammered coins.
Here's Edward 1st Farthing London mint.
Here's Edward 1st Farthing London mint.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
GB se dp
- Thread starter Terrytorment
- Start date
Big Boys Hobbies
Well-known member
WOW! Cool find! Thanks for the pic!
Terrytorment
New member
All credit due to the detector.
Sensitivity setting 85, Ground balanced,then Disc setting 31 and away you go
Sensitivity setting 85, Ground balanced,then Disc setting 31 and away you go
I note you used a Sensitivity setting of '85.' I just wonder if:
A Maximum setting of '100' was too noisy?
Do you feel that with the '85' Sensitivity setting, detection depth and general performance is close enough to the maximum setting of '100'?
With the Discrimination set at '31', do you always hunt those sites in the Discriminate mode, even though many older coins and such were rather small, and/or deep?
Thanks for answering,
Monte
A Maximum setting of '100' was too noisy?
Do you feel that with the '85' Sensitivity setting, detection depth and general performance is close enough to the maximum setting of '100'?
With the Discrimination set at '31', do you always hunt those sites in the Discriminate mode, even though many older coins and such were rather small, and/or deep?
Thanks for answering,
Monte
Terrytorment
New member
Hi Monte,
Sensitivity set at 100 is fine on the majority of sites.... but on sites with deep flat iron along with a lower discrimination setting of 31 it's hard work, even with discrimination set at 43/45 to reject coke it will accept more flat iron. It's the nature of the high frequency as I'm sure your aware. So I tend to run at sensitivity 85 for a while, pushing it up to as far as I can until flat Iron starts coming through the discrimination again.
A sensitivity setting of 85 is fine and a safe bet for any inland site. One point to add, as along with too high a discrimination setting, a high sensitivity can and will cause non ferrous target masking in heavy iron/mineralised ground.
Hence my choice of low discrimination/sensitivity settings until I'm sure I can get away with it.
There is too much Iron in general on the sites I search over here although if I do get lucky enough to come across a nice find then I'll search in all metal for the next half an hour to see if it's got any friends ;-)
Terry.
Sensitivity set at 100 is fine on the majority of sites.... but on sites with deep flat iron along with a lower discrimination setting of 31 it's hard work, even with discrimination set at 43/45 to reject coke it will accept more flat iron. It's the nature of the high frequency as I'm sure your aware. So I tend to run at sensitivity 85 for a while, pushing it up to as far as I can until flat Iron starts coming through the discrimination again.
A sensitivity setting of 85 is fine and a safe bet for any inland site. One point to add, as along with too high a discrimination setting, a high sensitivity can and will cause non ferrous target masking in heavy iron/mineralised ground.
Hence my choice of low discrimination/sensitivity settings until I'm sure I can get away with it.
There is too much Iron in general on the sites I search over here although if I do get lucky enough to come across a nice find then I'll search in all metal for the next half an hour to see if it's got any friends ;-)
Terry.
Les in the UK
New member
Monte
I have the Gold bug dp and on the Celtic and Roman sites that we have over here i find that i can run the Gold bug on 100 sensitivity most of the time, i also set the discrimination at 27 or 30 as a discrimination setting of 40 will mask out good targets that lay close to iron.
I have found that the Gold Bug can get a little noisy on one part of the field that has a lot of iron trash in it and i turn the sensitivity down to 90 or 85 when detecting in this area, I have found that i have to turn the discrimination up on my Tesoro detectors to compensate when detecting in the same area.
I have to go out now but i will try and post my thoughts and finding on the Gold Bug when i have a bit more time. you take care Les in the UK
I have the Gold bug dp and on the Celtic and Roman sites that we have over here i find that i can run the Gold bug on 100 sensitivity most of the time, i also set the discrimination at 27 or 30 as a discrimination setting of 40 will mask out good targets that lay close to iron.
I have found that the Gold Bug can get a little noisy on one part of the field that has a lot of iron trash in it and i turn the sensitivity down to 90 or 85 when detecting in this area, I have found that i have to turn the discrimination up on my Tesoro detectors to compensate when detecting in the same area.
I have to go out now but i will try and post my thoughts and finding on the Gold Bug when i have a bit more time. you take care Les in the UK