Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

First real day out and look what I found.

Steve from Ohio

New member
OK. I should have listened and got the E-Trac sooner. But at least I got it, finally. I'm dealing with a bad knee so it is not easy to detect right now. But I forced myself to go out and was glad I did.

Was out yesterday and was just fooling around trying to learn a little about the new machine. Found a few things and was digging everything just to learn. Today I put some of the knowledge to work.

Today I had a chance to spend about 4 hours out with it. I will say this, the E-Trac sure does work well. I for the life of me cannot figure out how a Hotwheel car can get over 12 inches deep. It is not a real old one either. It read 11-45 and hit real hard. The depth reading was a little off..by about an inch. Not too bad. Why is it that so many hotwheel cars are lost? I have found several dozen lately and a lot are fairly deep.

I hit $3.21 in clads (not in the photo) and as you can see a few other things.

The Palmolive soap token was at over 15 inches and I thought I was digging to friggin China ! I never hit a target that deep ever with any other machine I have owned. It hit at 11-43 and my Pistol Probe did not get a whiff of it until I dug down deep. They are from the 1920's.

The standing liberty quarters were all found within a few feet of each other. In the area I was searching, I did some research and found that there used to be a small general store in the area and that where I was searching was the parking lot. It is now just grass. The quarters read 11-47 each one. Pretty much the same depth of 7 inches. The 53 quarter read 11-46 and was down about 4 1/2 inches.

The 1835 large cent was found almost by accident. I was MD'ing around an area that had a lot of iron nulling out the E-trac. I was about ready to detect another area and then it hit at 11-46 and I thought at first it was another quarter. I found it buried under a piece of rotten wood and a broken piece of china and was in pretty good shape. Almost no corrosion. My first large cent.

The barber dime hit at 11-46. Down about 5 inches. It is pretty well worn but still silver is silver.

And finally, the gold ring. My first with the E-trac. 22 kt. gold. With gold rising in price, and my confidence in the E-Trac growing every day, I can figure on a lot more gold rings and much more money for them down the road. It hit at 14-47.

Saturday I will be detecting San Toy, Ohio. A coal boom town and the only town east of the Mississippi that lived up to the legends of old west towns. Started back in the late 1800's and stayed a town till the late 20's. Many shoot outs, many murders, several saloons with working girls and now abandoned. And right here in Ohio. It's going to be a fun day.
 
WOW nice finds!!!! i havnt had a day like that with mine..... need to do some better research i guess...... also can you air test that 22K ring ?? the vdi numbers are a bit high for 22K .


thanks


mikeB
 
The ring is marked "INDIA" on the inside and from what I know, that is by law in India 22kt. gold.

It reads 14-45 when air testing. I write down all my finds so I can learn from them and it read 14-47 before I dug it up.
 
Hi Steve,

Nice finds!

On the hotwheel car, I dig em deep often enough at the beach to know kids bury them. Cant tell you why they do but they do. Ive dug many "new ones" that deep myself. Got a box full of them I dont know what to do with but hate throwing them out.

On the ring, Ive got one 22k ring, looks about that size, and its one of only two rings I ever found(gold) that read like a zinc penny. Does yours read there also?
Ive got an explorer so I dont know the way the etrac numbers things. I found my ring with a sov, came up 176 on a 180 meter. I tested it on my Explorer and it reads at the same spot on the screen as a zinc also. The other one I found that read that high is a 14k high school ring that was so big my thumb could slide through and barely touch it.

HH
Neil
 
n/t
 
[size=large]Re: First real day out and look what I found.....Proof, positive.[/size]​

****************************************​

Steve, I'm glad that you've had a good start with your E-Trac.

It is fortunate to do so, because whenever the 'poor' days come along, you will know that there are reasons other than the capabilities of your Minelab.

It truly is a fine detector, even if some aspects don't please the odd Explorer die-hard.

Take the machine for what it is AND LEARN how it 'sees' things.

Remember this single fact. It was primarily redesigned to combat iron masking, and improved ground handling. ( All part and parcel of the same effect).

Consequently, it has improved depth capabilities.

Any 'thinking' detectorist knows that targets located at depth incur an apparent degradation of their VDI's Fe component.
In reality, the detector sees a
 
At first I was using the factory coin setting. Being new to the E-Trac, I wanted to stay with that program at first to get the hang of the machine. I found the quarters with that setting. I also found the large cent and the iron in the area was heavy and I was about to move and try an open screen in a cleaner area.

I then quick masked an open screen to hear all the noise the ground was giving and to get used to changing settings, and I hit the Palmolive token at a little over 15 inches. I moved back to the factory coin setting and was still able to hear the token.

After getting back to the factory coin setting, I then hit the gold ring and the barber dime.

For the next few days, I'm going to stick with the factory settings and learn the machine's capabilities with them. Once I get those down, I'll play with the settings and see what I can mess up!
 
Nahh....He's my twin brother, always getting into trouble and I have to take the flack.

But we're still good mates, becaus he lets e borrow his new E-Trac.

He's older than me, but I'm better lookng.

What do you think?


[attachment 111690 twins2.jpg]
 
Thanks Etrackerman. I know some days will be good and some bad. I've had all and then some in the last 23 years. I do know this. The views of some Explorer owners are right for them. I've owned an Explorer (bought it used and sold it to my brother) for about a year and enjoyed using it.

But this E-Trac to me seems to be the best machine I've used so far for the types of hunting I do. The Explorer had some trouble in very trashy areas which the E-Trac seems to handle like it was nothing. I do like the Explorer for what it is. A great machine. It's just that for me at least, the E-trac is better in those areas that I hunt.

I think pre-planning and research for your detecting is more important than most think. I did some research before I went out and found that there was an old general store around the turn of the century till the 20's where I was planning to hunt. I found some old photos and maps and the area has changed quite a bit, but the land layout was still the same. I was able to figure out where the store was and where people parked. I was then able to find the areas where I would most likely find something. It is now part of the Metro parks in Cleveland and is wide open to detecting with a permit. There are many areas in the Metroparks that are historic and if people would do some research, they could find the same type areas where they live too.

The more I detect, the more I find it is just like fishing. Only more profitable.
 
Top