Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

First Hunt With Anfibio

RLOH

Well-known member
I just bought an Anfibio and had some detectable weather here in northeast Ohio. I have never had a bad detector, but I have had one's that were better than others. With that said, I have liked just about every detector I have tried. When the morning started, I knew that I would like the Anfibio, but just how much?

The morning started with digging many signals, some locked on, some bouncing. I quickly realized that this detector would lock onto coins with very little variation in the tones and numbers. I dug 20 clad coins with nothing deeper than 5-6 inches. As I said, coins stayed very consistant with their numbers and tones. After an hour or so, I had not found anything very deep, but I knew there should be older coins in the 8 inch deep range. My initial settings( 4tone, 75 sens, 5khz, and every other setting at default) I was getting an extreme amount of chatter and I started lowering my sens until I was at 55. On a whim, I switched to 3 tone, 91 sens, and 5khz. The detector was as quiet a church mouse. Very soon after switching to these settings I got repeatable tick of a high tone without any numbers. The gauge in pinpoint showed 12 inches and I was ready to dig a rusty washer or bolt. At a measued 10 inches(as deep as my pinpointer is long) I removed a penny. 1920 wheat. I muttered "wow' .

With this newfound knowledge, continued my hunt. I started listening for this type of target, but I started digging deep trash. I try to analyze every deep signal and after digging three or four of these deep high tone ticks only to find deep junk, I figured out that deep junk had a different audio. One way a perfect high tone, but when I turn 90 degrees, another high tone, but just about everytime it would have a slight scratch to the tone. I dug a bunch more and yes they were junk. I dug two more 9-10 inch wheats and while a weak high tone, there was no scratch to the signal. Seriously, the coins were every bit of 9-10 inches deep! If anyone has ever used a CZ detector, it had the sweetest repeatable high tone that almost always produced a deep coin. In 3 tone, the Anfibio sounds exactly like a CZ on a deep coin!

To finish off my morning, I purposely headed for section that was level ground at the bottom of a steep hill. I have found at least 10 silver coins and close to 50 wheats in this exact place. The first bunch of coins were found with a f75, I have rehunted it with two Explorers and found more older coins. I always make a pass or two when I am in the area, but I have found nothing in the handful of recent hunts.

I had a good feeling that the Anfibio would be able to root out a very deep coin or two. The first pass was a bust with only a deep piece of junk that I pretty much knew was junk. My second pass started out with the know recognizeable repeatable high tone, but this time, I got an occasional number flash(89-90). Again I saw a coin that was from 10 inches deep( I cleaned the loose dirt by hand so I knew how deep it really was). It was 1916 wheat. This area is a park along Lake Erie so the soil is sandy,but dark from the decomposing leaves which leaves the coins in great shape.

I have not even scratched the surface of what the Anfibio can do, but I will say it just might be the deepest detector I have ever used. Along with this impressive depth, it is the best built, most ergonomicly perfect detector I have used. Almost the "perfect" detector, but there is one big drawback. I absolutely hate the pinpoint button. It is way too small and I had to remove my gloves everytime to pinpoint. If Notka could have a finger toggle switch like the Racers, it would make this detector nearly perfect
 
Nice report. Being waterproof, they decided on a pinpoint button rather than the trigger to help in keeping it waterproof. I agree the pinpoint button could have been designed a little better. As you found out, 4 tone is hotter (noisier also) than 3 tone. Do some testing as the 3 tone has a faster recovery with the gain set at 89 or lower. With the gain set at 90 or above the recovery is slower but it detects deeper. 4 tone is deeper yet and sometimes it can be deeper than 3 tone even when the gain is set considerably low than a 3 tone setting. I'm glad you enjoying the Anfibio. Its a great detector.
 
Congrats on your successful first hunt with the Anfibio. My experience has been the same as Tom's in the previous reply. 4 tone gives me better depth than 3 tone, even if I turn the gain down to where it's not so chatty. Next time you hear one of those deep repeatable signals, I suggest listening to it in both modes(3 tone & 4 tone), and see if there is any difference. You may even want to raise the coil off the ground to see if there is a difference in the depth you are getting. Anyway, it sounds like you are off to a great start with your Anfibio. Keep those reports coming.
 
Top