Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

First day with the F75

jbow

Active member
So far I really like it. I was already used to the chatter from a year with the T2 so that does not bother me.

I was running it in 1, 4, an in DP; in DE, bc, and PF; with the sens at 50- 60- 70; disc at 6 or in All Metal. This in some pretty bad ground with iron and trash. It seem's to me that when you lower the sens it does not chatter less, it just chatter's and false's quieter.

It is well worth the extra money for the TID in all metal. I used the AM motion in a gravel parking lot for coins and it hit's very well on them, you can tell from the tone it's not trash and the TID verify's it, very easy coinshooting in AM.
It does chatter and false but it's just what it does. In areas of heavy iron and mineral I had to slon and swing teice over the same ground to tell a false from a hit but that's ok. I was able to tell bottle caps from coins from cans most of the time, even in the first few hours.

I am very happy with it so far.

I will say that if I had not used the T2 for such a long time, I may not be so pleased with the F75. It does take some getting used to and if you have not used one and you are going to buy one make sure that you are planning to take the time to learn it. If you have been using a Minelab you may well think there is something wrong with the T2 because of the vast difference between the quiet of the Minelab and the chatter of the F75 BUT... if you take the time to get used to it you will love it. It resets faster than you can think.

I love the TID in A/M mode.

J
 
couple of questions on the t-2. sometimes when i dig a plug i check the hole, no signal, plug, no signal back to the hole and now i get a signal. its like the machine audio shuts off but it doesn't do it every time. when i check a signal from different angles and the signal doesn't repeat from one or more angles is the signal iron. i know on the sovereign it is. thanks.
 
sometime's I get that too, I don't know what it is. I use a pocket Uni-probe and if I cut a plug and it does not sound right with the UP, I just put it back and keep going. If there is something there worth having the UP will signal on it and pinpoint it well but if it signals but does not pinpoint well, I never find anything. I think a good probe will help you with this.

J
 
Top