https://youtu.be/JK4uMJHKwoU
A few things I didn't mention in the video a east west hit always falses at the surface or at depth the bottle cap (iron) always gives 2 hits east west or north south , other bottle caps well give 1 hit those with aluminum foil in cap or just the metal there made of . Also pieces of iron , square , strips , irregular shapes and such well display the double hit but washers and stuff similar well give only 1 hit because there round with no points on them .(when I mention east west or north south think of the coils tip that's the farthest away from you as north). The north south hit on the nail well give only 1 hit if your 3 inches above or 3 inches deep the dime well triple hit if on the surface or about 2 inches deep , deeper well be a single hit .
When pinpointing the target you want to be in the center of those 2 hits east west to get the most accurate id of it you see me going back and forth over the falses on the side of the real target this is to show you that the falses also build on the screen 1 at about 12.15 and the other at 12.47 or 12.48 with the coin at the 12.37 mark being the biggest mark you can use these falses to find the center of the true target but when you pinpoint try to stay in the middle .This is very important when you have multiple nails to contend with.
The 12.37 I am getting from the coin is dragged down because of the size of the nail if it was a 4 inch nail the numbers would be 12.25 or so you can see that different sizes of iron well give different id numbers. Also the bigger the nail the less depth you will get or other iron object .
So most people get a false and pinpoint only to be dragged away from the original hit , but did they check to see if a coin was there using trace or just kept on detecting .Most of these hits when they happen are north south falses because they are actually pinpointing the nail but did they see if there was a target with that nail . On a east west hit there on the false which will build and dig and receive nothing because on this hit the nail is silent unless they hit the other false on the other side of the target .
The same thing happens with a coin 3 to 4 inches north or south of the nails center on a east west hit if you were creeping you would of picked that coin up before the nail and if you creep by the nail and there was a coin 3 inches north of the nail you would have picked it up with the tail of the coil .So the importance of overlapping the coil sweeps.
Find the target the 2 hits nail bottle cap whatever turn 90 degrees to the target are you getting 1 or 2 hits nail will be 1 hit most other iron object will retain the 2 hits either way now you kind of have a ideal what your looking at if a coin is with the nail chances are you will get audio on the other iron object with the 2 hits creep both ways to see if you can get audio .
If you receive no audio go to target trace pinpoint and see if you can build a target . I have my hot key thank to Bryan v trojdor and set up with high trash with disc set to just knock out nails I will check it in this mode also it discriminates a little different than ferrous coin giving me more imfo . Your still checking the target from north to south because the nail does not mask as well this way . Unless there are more nails involved which I will explain in a future video.
Non ferrous items are easy to work in there displayed on the screen and are not silent it's the iron that gives the problem being silent or throwing a false where the target is not located that's why you have to know what the iron is doing .
sube
A few things I didn't mention in the video a east west hit always falses at the surface or at depth the bottle cap (iron) always gives 2 hits east west or north south , other bottle caps well give 1 hit those with aluminum foil in cap or just the metal there made of . Also pieces of iron , square , strips , irregular shapes and such well display the double hit but washers and stuff similar well give only 1 hit because there round with no points on them .(when I mention east west or north south think of the coils tip that's the farthest away from you as north). The north south hit on the nail well give only 1 hit if your 3 inches above or 3 inches deep the dime well triple hit if on the surface or about 2 inches deep , deeper well be a single hit .
When pinpointing the target you want to be in the center of those 2 hits east west to get the most accurate id of it you see me going back and forth over the falses on the side of the real target this is to show you that the falses also build on the screen 1 at about 12.15 and the other at 12.47 or 12.48 with the coin at the 12.37 mark being the biggest mark you can use these falses to find the center of the true target but when you pinpoint try to stay in the middle .This is very important when you have multiple nails to contend with.
The 12.37 I am getting from the coin is dragged down because of the size of the nail if it was a 4 inch nail the numbers would be 12.25 or so you can see that different sizes of iron well give different id numbers. Also the bigger the nail the less depth you will get or other iron object .
So most people get a false and pinpoint only to be dragged away from the original hit , but did they check to see if a coin was there using trace or just kept on detecting .Most of these hits when they happen are north south falses because they are actually pinpointing the nail but did they see if there was a target with that nail . On a east west hit there on the false which will build and dig and receive nothing because on this hit the nail is silent unless they hit the other false on the other side of the target .
The same thing happens with a coin 3 to 4 inches north or south of the nails center on a east west hit if you were creeping you would of picked that coin up before the nail and if you creep by the nail and there was a coin 3 inches north of the nail you would have picked it up with the tail of the coil .So the importance of overlapping the coil sweeps.
Find the target the 2 hits nail bottle cap whatever turn 90 degrees to the target are you getting 1 or 2 hits nail will be 1 hit most other iron object will retain the 2 hits either way now you kind of have a ideal what your looking at if a coin is with the nail chances are you will get audio on the other iron object with the 2 hits creep both ways to see if you can get audio .
If you receive no audio go to target trace pinpoint and see if you can build a target . I have my hot key thank to Bryan v trojdor and set up with high trash with disc set to just knock out nails I will check it in this mode also it discriminates a little different than ferrous coin giving me more imfo . Your still checking the target from north to south because the nail does not mask as well this way . Unless there are more nails involved which I will explain in a future video.
Non ferrous items are easy to work in there displayed on the screen and are not silent it's the iron that gives the problem being silent or throwing a false where the target is not located that's why you have to know what the iron is doing .
sube