Factory reset after coil swap? :shrug:Huh? In a post below

[Ytcoinshooter]

Factory reset after ea coil swap? Ok - did I miss that - I swear I've read the manual several times... Can anyone elaborate on this?
Wheres my coffee....?
HH - Bruce

 

[jim tn]

Was wondering myself. I never have and don't feel I had any loss of power and no chatter issues??? HH jim tn

 

[tarajudy]

I always do a factory reset once a week. WHY YOU NEVER KNOW WHEN YOU OUSH A WRONG BUTTON (LOL)

 

[mudpuppy]

I'm gonna half to look that up...I've never once ground balanced or factory reset the thing since day one, two years ago July...probably should do both, what with solar flares and Fukushima and all.. Still, it seems to work just fine,
Mud.

 

[WaterWalker]

Here is what it says: (page 53 under Warranty)

In the event you encounter problems with your AT Pro
detector please read through this Owner

 

[dgruff]

I did a reset on mine this morning, after reading that other post. But, it was operating fine, then and now.

 

[John-Edmonton]

All Garrett metal detectors have this feature. And an excellent feature to have.

 

[PKB]

good measure is after every battery change

 

[upnorth]

Here is what it says: (page 53 under Warranty)

In the event you encounter problems with your AT Pro
detector please read through this Owner

 

[Waterdog]

Coffee... Who has the Coffee, I need a cup

 

[Night Crawler]

The factory reset should be done after a coil change from one size to another (especially from a large coil to a small one). My machine was acting a bit squirrely (actually a lot squirrely) when I went from the 8.5 x 11 to the 5x8 coil so I gave Garrett a call, the rep said to try a factory reset, I did, and that fixed the problem. After the reset, the machine ran as well as it did before the coil change.

I do the reset after every coil (size) change and I no longer have the issues I had. Much smoother running now.

Just a heads up on this no very well mentioned procedure.

 

[Stryker47]

I had the same issues when going from the big to small coil the machine wasn't acting right. I did the reset and she was.back to her old coin finding self so every time I switch I do a reset now. Have never had an issue since.

 

[senda]

My only problem now with the AT PRO is this: where the coffee goes to put the cup?