Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

F75 DE ,BC, AND BP PROCESS COMPARED TO THE EQUINOX.

C

calabash digger

Guest
EMI is a factor in this video . So if someone wants to send me the latest f75 to test on these same test I will pay shipping both ways. I will also set it up how ever you say to set it up for maximum performance on these test.I run the f75 with high gain and low gain and test all 3 modes. The Nox is running in park 2 with recovery speed of 5 and iron bias at 2. If there is anything you disagree with we can talk about it in a civil manner..[video]https://youtu.be/wHjxafWDFFA[/video]
 
Run the '75 in Stat mode. (only 1 tone, so its going by meter)
How is the EQ on bottlecaps?
 
don't know don't hunt parks but others are reporting on it. I can tell you I would not want to run a machine in 1 tone. I don't like Tesoro for that very reason. I sure don't want to have to rely on the meter. Why do you say run it like that?
 
the reaction is instantaneous (not recovery-does not shut off), and you can hold it still over targets.
That mode has PI depth too-try some air tests. However there is no autotune and there is drift, hitting retune is necessary.
 
Question ?

You stated not a doubt in the world that was a silver dime with EQ. If you were in the wild, "not test garden".Would your answer be so positive.
Is there variables that could make it iffy ?? Iron nearby or something else ... or just not knowing what the target is in an unknown area.
I am certainly not trying to cast doubt. Just trying to learn all available knowledge with many others.

Thanks for the comparison. I know it takes a lot of time and effort on your part..That is greatly appreciated.
 
You caught it I should have not have said that because in the wild I might not have been so sure TODAY... the emi was bad this morning and I had to cut the machine back .I f you noticed in the other video yesterday it was giving that nice Minelab silver high tone on it. That machine has a very distinct sound on silver coins. I have tested of course and have found 3 silvers in the wild with it too. Merc, rosie and a barber quarter yesterday. I knew or I least I thought I knew they were silver. I called my buddy over on the 2 dimes and called them silver before I dug in my relic video. The coin yesterday is on video too and I talk about it being the most high conductive target I have been over with the machine before I dug it on tape. So in the garden this morning I should have not said that...
 
That F75 is broken or something was real close to it interfering with it. I have never seen a F75 sound like that. The numbers on the Equinox was jumping everywhere too.
 
EMI is a factor in my garden. Its a older model f75 and they are well known for that issue. I agree though if I had paid fisher big money for that back in the day and they sent me that I would have thought it was broken too...
 
You must log in or register to reply here.
Top