Equinox 800 Wireless Headphones Connection

[namron13]

Good morning just purchase Equinox800 I'm having problems connecting to the wireless headphones I turn on the head phones on as per instructions wait for two beeps then blue and red-light flashing then I turn on blue tooth seems Blue-tooth is constantly searching for the headphone with no luck connecting . I have done the initial set up. Any ideas thanks in advance.

 

[laplander]

From the off position press and hold the wireless button on the detector wait for tone response, approximately 5 seconds, the pairing take a bit keep the units close together. Watch the icons on the detector for progress.
HH Jeff

 

[Folsom Don]

If you have successfully completed the initial pairing then this should work. 1. Make sure the wireless headphones are turned OFF and are within 3 feet of the detector. 2. Turn the detector on and wait until it is ready to detect (about 5 to 10 seconds) and the wireless icon is flashing. 3. Turn on the headphones (short press on multi-function button) 4. It takes about 10 seconds for the pairing to take place and you should hear sounds on headphones..........Don

 

[mascard1]

Hey Don.... Hope you are doing good!

 

[Folsom Don]

Hey Steve, Doing good, detecting San Diego beaches about twice a week with the NOX 800. Love the NOX. Hope all is well with you.

 

[Mark kus]

Usually when I start my 800 up as soon as I turn on the detector I turn on the headphones a they almost always pair right up together.
Mark