Eagle 2 SL 90 Program Settings

[billbeep]

Hi Group I now have an extra lower stem and hardware for my 5.3 Bullseye Coil coming from Whites next week. I'll be using it with my Eagle 2 SL 90 detector.
My question is this....when editing my U2 set-up program for the small loop for best performance which parameters are most important to optimize for the 5.3 Coil.........for trashy land hunting coins only??

Thanks in Advance

Billbeep

 

[Dan-Pa.]

Wow its been a long time since I used one but increasing the recovery speed will help in the trashy areas and of course you may be able to increase the sens. to get more depth...Don't remember the names of these facets but should be self explanatory reading the manual. All depends on the mineralization in your area and if unit becomes unstable do a little experimenting by lowering slowly until your unit becomes stable and make sure you ground balance after you make any changes in the field. Probably the great grandad of the XLT but still a good unit with old technology at its finest...

 

[lockman434]

I bought my Eagle II SL 91 new and wouldn't sell or trade for nothing. learn to use the learn accept and learn reject
buttons to cut out the junk signals. When mine hits a good target, that is what the target is 99% of the time. Like someone
else said, check your local ground mineralization and make your adjustments accordingly. Read the book numerous times also.
take to book into the field and read it as your getting used to your machine. If I can be of any help please drop me a line.

 

[david bull]

I bought an Eagle 2 SL 90 with the signal balance knob on the front (still experimenting with that) at a yard sale last year.My favorite setting is PP/tone C.The tone id really squeals on silver and lead minnies.I covered a yard that I had detected with my XL-PRO in the past, hit a squeal with no vdi and dug an 1853 seated dime at 6".Great machine,easy to change settings without scrolling.Although I have a black max coil on my XL,I still prefer the 950 on the EAGLE.DBULL