Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

discrim entering xlt spectrum

squid24

New member
hi i have just brought a whites xlt im trying to add a new program
i have got a few programs off internet i dont understand how to enter the descrim numbers quoted on programs i got these from internet. its just me being thick. this is the program could any one give me a step by step how to enter these numbers to discrim edit because every time i try it then save the program then load the program and try it.IT makeS the machine go mad beep all the time when there is no metal even there which says to me im entering then numbers in a wrong way.
please help its driving me mad

BASIC ADJUSTMENTS:




TARGET VOLUME PERSONAL PREF

AUDIO THRESHOLD Faint background hum

TONE (AUDIO FREQ) 236

AUDIO DISC ON

SILENT SEARCH OFF

MIXED-MODE OFF

A.C.SENSITIVITY 73

D.C.SENSITIVITY 45

BACKLIGHT 0

VIEWING ANGLE 25



PRO - OPTIONS
AUDIO RATCHET PINPOINTING ON

S.A.T. SPEED 5

TONE I.D. OFF

V.C.O. ON

ABSOLUTE VALUE OFF

MODULATION ON

G.E.B. / TRAC AUTOTRAC OFF Re - ground balance if machine becomes un stable

TRAC VIEW OFF

AUTOTRAC SPEED N/A

AUTOTRAC OFFSET N/A

TRAC INHIBIT N/A

COARSE G.E.B.

FINE G.E.B.

DISCRIMINATION DISC EDIT REJ -95 TO -11

ACC -10 TO +95

BLOCK EDIT AS ABOVE

LEARN ACCEPT OFF

LEARN REJECT OFF

RECOVERY SPEED 23 Turn down to 15 on a site with low Iron (better depth)

BOTTLECAP REJECT 1

DISPLAY VISUAL DISC. ON

ICONS OFF

V.D.I. SENSITIVITY 90

D.C. PHASE ON

GRAPH AVERAGING ON

GRAPH ACCUMULATING ON

FADE RATE 7

SIGNAL TRANSMIT,RECEIVE TRANSMIT BOOST ON

TRANSMIT FREQUENCY 4

PREAMP GAIN 3 is good ...adjust to suit your soil conditions
 
Go to Block Edit.
Press Enter.
Use the down arrow to go to -95
If the screen says ACCEPT, press Enter to change to REJECT.
Press up arrow until you get to -10
Press Enter to change REJECT to ACCEPT
Press up arrow until you get to +95
Save your program.

Also I'd use Autotrac ON to help ground balancing. Autotrac Speed around 12.
 
Just a tip. First ANYTIME the preamp gain is changed YOU MUST ground balance. Second, your area may not support the preamp gain of 3 with an AC sensitivity of 73. From what you are describing after you get the discrimination ranges entered correctly if it is still doing as you first describe then the machine is UNSTABLE due to too much gain so you either have to reduce the preamp to 2 or reduce your AC Sensitivity to the 60's say 64 and ground balance and try again.

Hope this helps.
dfwdetector
 
Top