DFX all metal program anyone?

[coinnut]

Just looking to see if anyone has stumbled on to a good program for the dfx using a small coil in all metal mode (or mixed mode). I can't seem to get one to work deep for me with great separation. And I'm not at all good with the mixed mode. Any where I can visit to get lessons or instructions. I'll try anyone's program and advice. Thanks!!

 

[ukviking]

Hiya coinnut
I live in the UK and I use this all metal program.

rogers-relics-uk.com
Whites Detector Center
=> DFX Programs => Topic started by: Roger on 20 August 2006, 11:18:21


--------------------------------------------------------------------------------
Title: Toddy's DFX Mixed Mode
Post by: Roger on 20 August 2006, 11:18:21
--------------------------------------------------------------------------------

Toddy's DFX Mixed Mode

Target Volume ..........................63
Audio Threshold .......................10 (This is Important)
Target Tone .............................190 (Iron Tone)
Audio Disc ...............................ON
Silent Search ............................OFF
Mixed Mode ..............................ON
A/C Sensitivity ..........................70 - 74
D/C Sensitivity ..........................30 (Volume of rejected Targets)
Backlight ..................................OFF
Viewing Angle ..........................30

Ratchet Pinpoint .......................ON (Important as you don't use VCO)
S.A.T Speed ............................7
Tone ID ..................................OFF
V.C.O .....................................OFF (Important)
Modulation ..............................OFF
Autotrac ..................................ON
Trac View ................................ON (Until Set)
Autotrac Speed............................??
Autotrac Offset .........................0 or +1
Trac Inhibit ..............................ON
Course G.E.B ............................AUTO
Fine G.E.B ................................AUTO
Block Edit .................................Accept -29 To +95
Block Edit .................................Reject -95 To -30
Learn Accept ............................OFF
Learn Reject .............................OFF
Recovery Speed ........................30 - 40
Bottle Cap Reject ......................1
Hot Rock Reject ........................10 (Hot-Rocks will give a low buzz like Iron)
Sweep Speed ...........................6
Ground Filtering .......................6
Visual Disc? ? ..........................ON
Icons ......................................OFF
V.D.I Sensitivity .......................85
D.C Phase ...............................ON
Graph Averaging ......................ON
Graph Accumulate ....................ON
Fade Rate .................................8

Preamp Gain ............................3 - 4
2 Frequency Best Data ...............ON
2 Frequency Correlate ...............OFF
V.D.I Normalize ........................ON
1 Frequency 3KHz .....................OFF
1 Frequency 15KHz ...................OFF

Posted with kind permission of Colin Irvine (Toddy)




Powered by SMF 1.1.2 | SMF

 

[coinnut]

Thanks. I'm in New England. I'll give that program a try.

 

[Toddy from Scotland]

Thanks Lads I am glad you liked it

 

[satdaveuk]

Thats a new one on me, I thought I new the DFX inside out, I will try these settings, If you want any of mine, feel free to ask.

All the best
And thanks again

Dave
Hiya coinnut
I live in the UK and I use this all metal program.

rogers-relics-uk.com
Whites Detector Center
=> DFX Programs => Topic started by: Roger on 20 August 2006, 11:18:21


--------------------------------------------------------------------------------
Title: Toddy's DFX Mixed Mode
Post by: Roger on 20 August 2006, 11:18:21
--------------------------------------------------------------------------------

Toddy's DFX Mixed Mode

Target Volume ..........................63
Audio Threshold .......................10 (This is Important)
Target Tone .............................190 (Iron Tone)
Audio Disc ...............................ON
Silent Search ............................OFF
Mixed Mode ..............................ON
A/C Sensitivity ..........................70 - 74
D/C Sensitivity ..........................30 (Volume of rejected Targets)
Backlight ..................................OFF
Viewing Angle ..........................30

Ratchet Pinpoint .......................ON (Important as you don't use VCO)
S.A.T Speed ............................7
Tone ID ..................................OFF
V.C.O .....................................OFF (Important)
Modulation ..............................OFF
Autotrac ..................................ON
Trac View ................................ON (Until Set)
Autotrac Speed............................??
Autotrac Offset .........................0 or +1
Trac Inhibit ..............................ON
Course G.E.B ............................AUTO
Fine G.E.B ................................AUTO
Block Edit .................................Accept -29 To +95
Block Edit .................................Reject -95 To -30
Learn Accept ............................OFF
Learn Reject .............................OFF
Recovery Speed ........................30 - 40
Bottle Cap Reject ......................1
Hot Rock Reject ........................10 (Hot-Rocks will give a low buzz like Iron)
Sweep Speed ...........................6
Ground Filtering .......................6
Visual Disc? ? ..........................ON
Icons ......................................OFF
V.D.I Sensitivity .......................85
D.C Phase ...............................ON
Graph Averaging ......................ON
Graph Accumulate ....................ON
Fade Rate .................................8

Preamp Gain ............................3 - 4
2 Frequency Best Data ...............ON
2 Frequency Correlate ...............OFF
V.D.I Normalize ........................ON
1 Frequency 3KHz .....................OFF
1 Frequency 15KHz ...................OFF

Posted with kind permission of Colin Irvine (Toddy)




Powered by SMF 1.1.2 | SMF