Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Deep Searhing
- Thread starter butch
- Start date
The best performance is going to come from a "V tuned" Super 12. Most likely your is not. You can check the serail #...if it starts with a "v" is is, otherwise it is not. Also keep in mind tweaking your V's settings is another way to get more depth out of the same coil. It's not just the coil, but how you use it!
Larry (IL)
Well-known member
You don't say what you are looking for. If it is coins, the deep silver program will probably get you as deep as you want to dig.
I guess I will break down and go after a new 12 inch coil,mine is definetly the older version. Playing around with the tweaking is fun,so I'm looking
forward to that.It's so easy to re-set it all too.Last evening found a nice silver ring 7.5 inches down,with a root grown right through it.I thought that was pretty neat!
forward to that.It's so easy to re-set it all too.Last evening found a nice silver ring 7.5 inches down,with a root grown right through it.I thought that was pretty neat!
Just like Larry said, deep silver is a great program, but there are settings within it that I personally don't care for. The great thing is, you can make a duplicate of the program, rename it(Butch's Coin Killer) and tweak the settings that you may not like. In my case, I'm not referring to settings that have a lot to do with depth performance, but rather audio tones and VCO in the mixed mode. I love VCO for pinpointing, but not so much during search. I also tweaked my ground filter to 7.5Hz band...seems to work best for MY ground and sweep speed....you may find that not the case. I also use the "pine" screen....I like the color scheme better!
jtalley007
Active member
I use the high pro program and am getting minnie balls down to a measured 14" In my ground I can crank the gain to 15, boost on, and disc between 88-92 if no EMI. In places where power lines are a problem I have had to go to single frequency 22.5
You may try one of the single frequencies since that alone will give you an inch or 2 more depth since all the power goes to that single one and is not divided. I used mine about 5 times in hard worked sites with good results then the heat came and not detecting for me till fall.
Jerry
You may try one of the single frequencies since that alone will give you an inch or 2 more depth since all the power goes to that single one and is not divided. I used mine about 5 times in hard worked sites with good results then the heat came and not detecting for me till fall.
Jerry