D2 Coil Help

[Flintstone]

I just got a D2 coil try it today and can,t Pinpoint with it worth a s$$t. I have a 6x10 and do fine with it. Dose the D2 go from toe to heel like the 6X10? I was off 2 to 3" with the D2. Any help would be grate. Thanks Dean

 

[cvs]

That is the coil I use most all the time on my V3, first you need to be sure you are pinpointing correctly for you machine. I go front to back and side to side till the V3 reads the least in depth. It will always be right under the wing connecting to the rod for me.

 

[Larry (IL)]

The D2 should work the same as the 6X10. Be sure to start off to the side and then squeeze the pinpoint trigger and center. Practice on a visible coin on top of the ground by holding the coil a few inches off of the ground.

 

[Flintstone]

Thanks Larry, CVS, I will try this, I have only used the D2 once, for 20 or 30 min. I used the 6x10 always on my MXT with no trouble, it always pinpointed at the rod connector. But this just don't seem to do that. I hope i didn,t make a mistake trading my 6x10 away. Thanks for help. Dean

 

[Larry (IL)]

I used the 6X10 for many years on my DFX as the standard hunting coil and then later went with a 10"DD and was very pleased with the extra depth...1-2 inches.