Aces High 333
New member
To start out Father's Day I was going to hunt the blanket line a local beach. I arrived and start out. A lady that was cast netting came over and asked if I could check half of a volleyball court for a toe ring that her friend lost. I thought why not, it would be good. I started out with the 8" coil but found that I was working in too much trash. I switched to the new 5" coil. Now I have used a 4" coil with my Landstar and enjoyed it I hope to have good results with the 5". I started out with settings GB-6, Sens-5, Disc-0 in normal mode and Vol-5. The volleyball court had a top layer 4-6" of sand and packed dirt underneath. I was digging everything to understand my unit better. I learned allot about the CZ5 mainly the iron nails. I understand what you guys were talking about now with the high tone then iron. I dug about 75 assorted pull tabs and I did come up with a anklet and a silver charm (cup cake ). That 5" worked great I ended up with a sens-2 at the end of the hunt. What I would like to try is on the other side of the volleyball court is all-metal, high sensitivity, use the pinpoints depth meter to dig 6" and shallow. Here's a pix.
My daughter got the anklet.
HHing,
My daughter got the anklet.
HHing,