CZ3D Question

[davkeene]

Does anyone know where I can find the exact setup that NASA Tom Dankowski uses to set up a Fisher CZ3D to see if it is one of the "Hot"
detectors. It has something to do with getting an air test on a dime at 10" to 12". Also, what size coil is used in this setup? Thanks for any information.

 

[christopher-ohio]

Re: Fine tuning the CZ-3 Posted by: NASA-Tom (IP Logged)
Date: August 19, 2008 06:30AM


First,

Try an outdoor air-test with a dime. Settings:

Disc. = '0' (not auto-tune)
Sens. = '5'
Gnd Bal = '10'
Volume = '10'
Mode = 'enhance'

Keep the coil away from ALL metal objects. Do NOT place the dime on the ground. Keep the dime parallel (not tilted) to the coil...... wave the dime in front of the coil.....and report how far the unit will detect the dime. Should be around 11" (+/-) 1".
An 8 inch coil is used.

 

[davkeene]

n/t