Cz detectors

[MAKRO RACER POWER]

Dear .. Think of new models because we are in 2017

 

[vlad]

Then think of a CZ that is digital [chip] which can also run separate frequencies, or maybe 2 or 3 at once, and has a fully expanded
numerical range & notches ala the F-75. With a high powered p.p. mode and stat mode with auto ground (maybe learn accept/reject?)
And DD loops! .

 

[HaroldILL.]

Yeah but pure raw depth coil for coil CZ's still rule the Roost My Friend.

 

[Dan-Pa.]

Bite your tongue....25 year old technology at its finest....

 

[barbecued scallops]

Yeah but pure raw depth coil for coil CZ's still rule the Roost My Friend.

I'm starting to think this too. I bought a cz21 recently because I needed a detector to dive with but the first time I used it I was absolutely blown away by it's depth, stability and sensitivity. It's a beach detector with a little 8 inch coil and I air tested a quarter at 10 inches today...in disc! How is that even possible?

 

[HaroldILL.]

Yeah I had a CZ 2O Also that was Super Hot. I use to land hunt With it believe it or not. Man I dug some 11" Coins with it No Problem. It was one of the Hottest CZs I ever owned and I have had every model made.
They all were hot too.

 

[MAKRO RACER POWER]

Dears : thanks for your positive comments. So the cz technology is so old that's why we need the new options in this year if you can . Regards

 

[vlad]

...........wrong!
the CZ technology makes it one of the deepest on the market-still.
Its the package, box, meter, {features} loops.......... that lag behind.
Just needs updating.

 

[Zinc Penny]

The only new cz I would want is a analog CZ digital machines are less accurate and just overall cause more headaches. If analog says copper penny it's copper penny never had something identify on my cz as anything but what it really was. Every single digital machine I've used has had bouncy vdi and lacked a punch like the cz-3d had.

 

[rob.ream258]

COMPLETELY AGREE...... don't mess with a good thing. My CZ-21 rocks the house........ discrimination all the way down and still runs quiet... so quiet I don't know it's on till I put it near the scoop

Great machine - hits deep - finds the gold!!!!!!

 

[chuck ky]

If all you find that reads copper penny is a copper penny you're either not hunting very much or your not hunting trashy sites. there's just too many targets that read exactly like a copper penny on any machine for them not to be occasionally wrong.

 

[rob.ream258]

If all you find that reads copper penny is a copper penny you're either not hunting very much or your not hunting trashy sites. there's just too many targets that read exactly like a copper penny on any machine for them not to be occasionally wrong.

I actually agree with you on this one.............. copper penny's hit on or near silver ranges... zinks hit on or just above the gold. Hit a class ring that sounded like a shallow zink in every direction...... Crusty zinks in saltwater/dry sand are all over the place since they can be loaded down with crap or half eaten.................

 

[juit]

lol an old fart detector still kicking sssssss

https://youtu.be/Juub4rQTSH8

 

[rob.ream258]

think about it...... take just a moment and think....

power to the coil..........the CZ21 uses 4 9v batteries = power to the coil = depth

regardless of the age of the technology - the battery of the machine still powers the coil

this day and age all the manufacturers are making smaller and lighter machines USING smaller lighter batteries - less power to the coil - less depth

others complain about the weight or balance

I mounted my unit at the very top of the shaft by the arm cuff and on the bottom - it's balanced great and I can use it for hours in the surf without wearing out my forearms... that configuration also makes the machine feel considerably lighter also.......

 

[Altamaha]

The CZ is still Depth King, Yep!

 

[Blissterd1]

This is what makes my CZ the first choice of all my detectors! (White's DFX, XLT Spectrum, Prizm V, etc) It's an awesome machine!