https://youtu.be/p-eMkyblvG0 I purposely left this out of the last video to see if anyone would hear the high when in open screen no one said anything . It's hard to hear but if you know what to listen for you can hear it .
Now I know from testing all 32 to 35 go low ferrous #s all 48 to 50 conductive #s go low , Can you get a coin at 32.44 to 33.47 yes but it well go low this is where the iron has killed the signal also many nails read here so your going to dig nails . On a hit like this I only cross check the target to see if it goe's high.
Now all targets 31 to 1 ferrous #s will go high if not disc out all conductive # from 47 to 1 can go high if not disc out only targets with 32 to 35 ferrous # in front of these will go low .
So I will ask what will you get by being in open screen as compared to adding the disc your not going to get a high from 32 to 35 conductive #s all go low disc or no disc .
In these test coil has to be on the ground dragging if you don't depth will only be shallow but I had no problem with the 6 or stock at 8 inches in my dirt .
I have another follow up video on this to show you more .
sube
Now I know from testing all 32 to 35 go low ferrous #s all 48 to 50 conductive #s go low , Can you get a coin at 32.44 to 33.47 yes but it well go low this is where the iron has killed the signal also many nails read here so your going to dig nails . On a hit like this I only cross check the target to see if it goe's high.
Now all targets 31 to 1 ferrous #s will go high if not disc out all conductive # from 47 to 1 can go high if not disc out only targets with 32 to 35 ferrous # in front of these will go low .
So I will ask what will you get by being in open screen as compared to adding the disc your not going to get a high from 32 to 35 conductive #s all go low disc or no disc .
In these test coil has to be on the ground dragging if you don't depth will only be shallow but I had no problem with the 6 or stock at 8 inches in my dirt .
I have another follow up video on this to show you more .
sube
