Couple questions...

[gfatizzi]

How do I save the changes I make in a current program? I know it's probably in the manual but I haven't had a chance to read it all the way through yet. Also, is the pinpoint volume adjustable? As far as I can tell, it is not. I DO know about normal and sizing and use it on sizing. I just wish it had a modulated audio like the disc which is adjustable by lowering gain. I see a lot of Minelab's presets gain at 24 and above but I really like a modulated audio on the disc and find between 15-20 works best for this. Is the pinpoint mode tied in to the disc volume or separate? Thanks in advance...HH George

 

[Larry--IndianaHVAC]

George if you created a program then you can save what changes you make along the way to it by going back into the menu where all your programs are and opening the one you are in and hit the save. You can't save changes you make to a Minelab program but they will stay until you switch to another program.

 

[gfatizzi]

By the way, loving the E-trac. Thanks again for the great deal! HH George

 

[Choc-Minelab]

George,
When you make changes to your settings press the detect button, save and that will take you to the detect screen. Then press the menu button and go to either modes, or discrimination. If you want to save only the pattern go to discrimination and chose save, then use one of the custom tabs. If you want to save the pattern and settings, go to mode, save, and chose one of the custom tabs.