kaolinwasher
Well-known member
Got the compadre, today and put it together and did some air testing, Was able to get a dime @ 5.25" good actually about 5.5 " gold ring about 6 to 7" now this is with factory settings I have not messed with it and i may not mess with it so i buried a dime at 4.5" deep and was not able to get it but noticed a signal off to the side about 3" off center from the dime it was saying Dig me 1st so i dug that and it turned out to be a small pellet at about 2", I was pleased with that , no wonder i could not get the dime so after digging the pellet i re scanned the dime and got a very faint signal but hey at least i was getting the dime and this dirt has magnetite in it not a lot but just enough, to make it loose some depth but hay close enough, then i started scanning closer to the cement sidewalk which has rebar in it , and it screws with any detector you just can't get close to it but , i was amazed i got a signal about 5" from the edge and it turned out to be a 22 shell agane i was impressed with how close i could get to metal and still get a hit , I owned in the past the 5.75 compadre but the 8" is doing just as well , I also tested it on all the broken small gold jewelry i have and it hit them all with good signals and on edge , and a silver chaine ably 1/16 wide solid at 2" + I would have to say this machine will find the small gold and that next to metal and fences and do it better than most detectors i have used and it is strong on gold to , But you have to be car full how much disc is used or you will loose things rather by masking or they just will not sound , but it pinpoints good and for what i like to do it will work well I will keep you posted on how it does ,