SEMPERFI61
New member
USING THE X-70 FOR RELIC HUNTING,CAN YOU USE BOTH MODES?I HAVE HEARD IT BOTH WAYS?NEED SOME HELP ON THIS.THANK YOU.SEMPERFI61
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
COIN MODE VS PROSPECTING MODE- X-70
- Thread starter SEMPERFI61
- Start date
USING THE X-70 FOR RELIC HUNTING,CAN YOU USE BOTH MODES?I HAVE HEARD IT BOTH WAYS?NEED SOME HELP ON THIS.THANK YOU.SEMPERFI61
You can use both modes. But only one at a time. If I were relic hunting, I would use the Coin mode, four tones, in all metal. I prefer to take advantage of the audio and visual target ID, which does not function as such in Prospecting mode. (LCD shows Iron Mask setting and tone selects threshold pitch). If you find yourself digging too much iron in all metal Coin mode, you can either set up in a Pattern, and notch out the items you want to reject. Or, you could switch to Prospecting mode and set the Iron Mask level to reject ferrous targets of a certain level. It is said the Prospecting mode will hunt a bit deeper. But again, you will sacrifice visual and audio target ID. Hope this helps. HH Randy