Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Coin Cleaning
- Thread starter Donut
- Start date
louis vuitton
New member
Took a while to cut and paste but I think this is the link, hope this helps.
Electrolysis Coin Cleaning Tutorial
NOTE: DO NOT CLEAN COINS THAT YOU SUSPECT ARE VALUABLE!
It will cut their value in half! Ask a local coin dealer first.
Disclaimer: You're doing this at your own risk. We will not be held responsible for any damage in case you burn your house down or any injuries caused by this project.
The first thing you need to get is an 9, 12 or 18 volt AC/DC adapter from an old phone, transistor radio, or something like that. The higher the voltage the better.
We found an 18 volt adapter at a thrift store for two dollars. Maybe you have one laying around in a drawer in your house somewhere.
Cut off the small plug at the other end of your adapter, and separate the wires. Strip the ends and attach an alligator clip to each wire with the screws that are supplied.
You can find alligator clips at a local hardware store or WALMART.
Don't buy the copper colored ones!!!
Find a stainless steel spoon, a glass cup, some salt, and you are almost ready to roll!
Fill the glass cup with cold water and add a teaspoon of salt and stir it up well.
For better conductivity of the water you could add several drops of lemon juice concentrate, but if you don't have it around don't worry, it will still work!
Now you will have to figure out which clip has the positive and the negative wires. The negative goes to the coin and the positive to the spoon.
If you don't have the tester to figure this out, don't worry, it's simple to figure out.
Put the stainless steel spoon in the glass and attach one of the alligator clips to it and attach the other clip to the coin.
Plug the adapter into the wall outlet and submerge the coin in the salty solution so it's completely covered without touching the spoon.
If your spoon starts bubbling you need to switch the alligator clips around.
After finding the negative wire, I put a knot on it so I know it goes to the coin.
If all is well the coin will start fizzling and bubbling within a few seconds. Make sure the alligator clip is touching the bare metal on the coin. You may have to remove a little of the corrosion to get to the bare metal.
In a couple of minutes it should look like a small cloud of dirt is forming around the coin.
The electrical current is passing through the coin and separating all nonmetallic particles off the coin.
After a few minutes the cloud will get bigger and it will start smelling not so good, so keep your window open.
Usually it takes about five minutes to clean up a coin. But it won't hurt to occasionally lift it out of the solution to check how it's doing.
After five minutes it should look something like this. Lots of black gunk floating on top.
When you feel it's done, unplug your unit. Don't ever leave the unit plugged in unattended because it gets real hot and could melt or catch on fire.
Here's what our coin looks like after pulling it out. I didn't disturb it while it was "cooking" so you could see better how the corrosion is just peeling off the coin.
It looked pretty horrible before we started.
PAGE 2
Electrolysis to Clean Coins
Here's a closer view. To stop the reaction get some baking soda and while rinsing your coin under a faucet, use an old toothbrush and rub some of the baking soda on it. I usually use my fingers, which works good also, but the black will stain your fingers.
After cleaning this coin up I was surprised to see many details including the date on this Standing Liberty quarter.
Hope you found this tutorial useful. We will try to write some more like this one in the near future, so stop by often!
Others who dared to try : )
We do get a large amount of emails from folks about this tutorial. Some love it, others can't get it to work. This one email stroke me as quite interesting, and I asked Mark is it was OK to post it here. I thought it would be a great addition to this page, so we can see how others are using electrolysis to their advantage.
From Mark Brophy
I just wanted to pass on a word of thanks to who ever wrote this article, your instructions for making a home based electrolysis set up was easy to follow and build.
I recently got back in to coin collecting, and while out antiquing with my wife I came across a bulk bag of ancient Roman coins so I bought them. I did clean some of the coins the old fashioned way by soaking them in various solutions and using polishes like "Peek" to do the rest.
Cleaning ancient coins is a time consuming, pain staking effort - that I enjoy doing, however coupled with your electrolysis set up the coins come out much cleaned and with sharper original detail coming to life.
Please see two photo
Electrolysis Coin Cleaning Tutorial
NOTE: DO NOT CLEAN COINS THAT YOU SUSPECT ARE VALUABLE!
It will cut their value in half! Ask a local coin dealer first.
Disclaimer: You're doing this at your own risk. We will not be held responsible for any damage in case you burn your house down or any injuries caused by this project.
The first thing you need to get is an 9, 12 or 18 volt AC/DC adapter from an old phone, transistor radio, or something like that. The higher the voltage the better.
We found an 18 volt adapter at a thrift store for two dollars. Maybe you have one laying around in a drawer in your house somewhere.
Cut off the small plug at the other end of your adapter, and separate the wires. Strip the ends and attach an alligator clip to each wire with the screws that are supplied.
You can find alligator clips at a local hardware store or WALMART.
Don't buy the copper colored ones!!!
Find a stainless steel spoon, a glass cup, some salt, and you are almost ready to roll!
Fill the glass cup with cold water and add a teaspoon of salt and stir it up well.
For better conductivity of the water you could add several drops of lemon juice concentrate, but if you don't have it around don't worry, it will still work!
Now you will have to figure out which clip has the positive and the negative wires. The negative goes to the coin and the positive to the spoon.
If you don't have the tester to figure this out, don't worry, it's simple to figure out.
Put the stainless steel spoon in the glass and attach one of the alligator clips to it and attach the other clip to the coin.
Plug the adapter into the wall outlet and submerge the coin in the salty solution so it's completely covered without touching the spoon.
If your spoon starts bubbling you need to switch the alligator clips around.
After finding the negative wire, I put a knot on it so I know it goes to the coin.
If all is well the coin will start fizzling and bubbling within a few seconds. Make sure the alligator clip is touching the bare metal on the coin. You may have to remove a little of the corrosion to get to the bare metal.
In a couple of minutes it should look like a small cloud of dirt is forming around the coin.
The electrical current is passing through the coin and separating all nonmetallic particles off the coin.
After a few minutes the cloud will get bigger and it will start smelling not so good, so keep your window open.
Usually it takes about five minutes to clean up a coin. But it won't hurt to occasionally lift it out of the solution to check how it's doing.
After five minutes it should look something like this. Lots of black gunk floating on top.
When you feel it's done, unplug your unit. Don't ever leave the unit plugged in unattended because it gets real hot and could melt or catch on fire.
Here's what our coin looks like after pulling it out. I didn't disturb it while it was "cooking" so you could see better how the corrosion is just peeling off the coin.
It looked pretty horrible before we started.
PAGE 2
Electrolysis to Clean Coins
Here's a closer view. To stop the reaction get some baking soda and while rinsing your coin under a faucet, use an old toothbrush and rub some of the baking soda on it. I usually use my fingers, which works good also, but the black will stain your fingers.
After cleaning this coin up I was surprised to see many details including the date on this Standing Liberty quarter.
Hope you found this tutorial useful. We will try to write some more like this one in the near future, so stop by often!
Others who dared to try : )
We do get a large amount of emails from folks about this tutorial. Some love it, others can't get it to work. This one email stroke me as quite interesting, and I asked Mark is it was OK to post it here. I thought it would be a great addition to this page, so we can see how others are using electrolysis to their advantage.
From Mark Brophy
I just wanted to pass on a word of thanks to who ever wrote this article, your instructions for making a home based electrolysis set up was easy to follow and build.
I recently got back in to coin collecting, and while out antiquing with my wife I came across a bulk bag of ancient Roman coins so I bought them. I did clean some of the coins the old fashioned way by soaking them in various solutions and using polishes like "Peek" to do the rest.
Cleaning ancient coins is a time consuming, pain staking effort - that I enjoy doing, however coupled with your electrolysis set up the coins come out much cleaned and with sharper original detail coming to life.
Please see two photo
[size=large]Yes, I've tried it and used it many times...I don't use it for what I believe to be "good" finds but do use it to clean very corroded or crusty finds. I even gave a demonstration of this same proceedure during a MD club meeting. Everyone was amazed at how my crusty silver quarter came somewhat clean.
It's fun to watch it work!
Angie[/size]
It's fun to watch it work!
Angie[/size]
Idaho-Marke
New member
n/t