Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

coils for the mxt:twodetecting:

I have a 6x8 S.E.F. coil from Kellyco on my MXT and I really like it. It is a lot more stable and faster in response. I primarily beach hunt with a Excal II but do use my Mxt on dry sand and in the trashy areas because of the speed of the MXT. I am not sure if you were asking if someone has both coils and the difference between the two? I am thinking about having the 10x12 put on my old Excal if that tells you anything. Hope this helps...The 10x12 would be just as great only bigger and deeper. I will say that with the 6x8 on the MXT it is a lot lighter. I always say it is like swinging a broom stick without the broom, so I should say it is like swinging a stick.

Chris
 
Hi - am running the S.E.F 10 x 12 on my mxt with no problems - it's very stable which is a good thing as I usually run in Relic mode with the gain +2 or +3 - trigger forward with no discrim - noisey but I can live with it.
The only down side is pinpoint - pulling the trigger or Xing the target is fine if its a smallish target in the top couple of inches or so - but once the target is over coin size (1") and deep then it could be anywhere under the coil - :crazy:
 
Is pinpointing an issue with coin size objects at variable depths with the 10X12 SEF? What area of the physical coil is denotes a pinpoint? I thought I read somewhere that it was forward of the rod mount.
 
I don't use the MXT but I have had the 10X12 on my DFX and V3i and both pinpoint very well with no problems. If you can't get a good pinpoint, try lifting the coil off of the ground a little bit. The sweet spot is right in front of the rod mount.
 
i have used both coils and really like them. i have had no problems pinpointing with the 10x12,i usually relic hunt and have dug civil war bullets at 10-12" using the 10x12 and the pinpointing was spot on.
 
You must log in or register to reply here.
Top