Chatter

[Low-Boy/LCPM]

First time user today after work I turned on the Deus and loaded my program and the machine was full of chatter...I couldn't do ground balance by pumping the coil...moved a few feet away and it did the same thing...Is there a reset I tried other programs and the same thing happened I will need to try and turn the sens way down to see if that helps??? It seemed to happen when I set it up for my 11 coil but after it saw it and now has it in the memory I went back to the stock coil and loaded that coil..

 

[Ism]

I have a wireless dog fence. When it is on, my Deus is almost unusable in any frequency.
You may have some RFI destabilizing your machine.

Or maybe I misunderstand your post. Only the 11" coil gives you trouble?

 

[Low-Boy/LCPM]

both coils chatter and I can pump to ground bal

 

[Sleepyjim]

Do a search on here there is a video that might help you, I posted a link and CZ did as well.....

Jim

 

[Sleepyjim]

Nvrmnd here it is:
https://www.youtube.com/watch?v=kjuANf3J3yg

at about 2 mins.

Jim

 

[Damianicus]

New to Deus.
Watched that video before and again just now.
Silencer just seems to be the devil for deep coins. Feeling like it should be at -1 at all times.
Also, I read that Tracking ground balance can silence a signal if you go over it too many times (as I tend to do, using the wiggle method of pinpoint).

 

[goodmore]

Silencer is filtering. Depending on your location you just need to use it or you will chase deep iron all day long. I have been hunting a place like this the last week. With the 11 inch coil you can get pretty good depth even with a silencer of two. But the rule should be use only what you need to.

 

[DukeOBass]

True. Using Manual or Pumping you can squeeze out more depth too.