Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
BHID 300 ?
- Thread starter Dertnc
- Start date
Joel-Winnipeg
New member
I have the standard 9.5 floater coil and will get 8 to 10 inches in the sand.
Using BHID Supertune it will find deeper targets
(Gobble Gobble ) one of the forum users posted that info a few years ago .
Using BHID Supertune it will find deeper targets
(Gobble Gobble ) one of the forum users posted that info a few years ago .
wavecrazed
New member
Whats a bhid300?
GENE EDWARDS
New member
It's the Whites Beach Hunter 300 ID, underwater Two frequency detector. It has a 12'' coil and three led lights for target ID, along with variable tones to go with the lights. It's a very good detector, with discrimination and all metal mode. It's water proof to 25' . I had one and found many gold and silver rings, bracelets and necklaces. I use the Excal II now because of it's extreme depth. but I wish I still had my Beach Hunter ID for a back up machine. Gene
BEACH HUNTER
New member
Set up right with a well trained ear...12-16" is not uncommon. with the 300
R-n-R Magnolia SpringsAla
New member
I wish I had gotten it 10 years ago!!!! Now if I only had the soild coil and not the floater crosshair coil!!
gobble-gobble
Member
(1) Turn on the BHID & go through the normal set up ( steps 2 thru 4)
(2) Set Sens. to pre-set with mode switch in disc mode.
(3) Turn threshold controlto faint threshold.
(4) Set mode switch to all-metal mode & ground balance machine normally.
(5) After ground balancing& while still in all metal, turn the sens. to MAX. The threshold will change to a high shrill.
(6) Hit thr reset to return to a normal threshold.
(7) Return to all-metal mode & re - do the ground balance. There will be a narrower window within which to balance at this time.
(
Leave the mode switch in all metal mode & begin hunting. There will be a marked improvement in depth.
(9) Note: There will no longer be tone identification between the targets. However, the target identification lights will still be accurate.
(2) Set Sens. to pre-set with mode switch in disc mode.
(3) Turn threshold controlto faint threshold.
(4) Set mode switch to all-metal mode & ground balance machine normally.
(5) After ground balancing& while still in all metal, turn the sens. to MAX. The threshold will change to a high shrill.
(6) Hit thr reset to return to a normal threshold.
(7) Return to all-metal mode & re - do the ground balance. There will be a narrower window within which to balance at this time.
(
Leave the mode switch in all metal mode & begin hunting. There will be a marked improvement in depth.(9) Note: There will no longer be tone identification between the targets. However, the target identification lights will still be accurate.