Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Battery

It might depend on the charger. Lith do check each cell to ensure all are charged equally...... bad cell could make it over heat quickly causing chargers to shut off before they are full. Some cheap ones may not shut off. My charger does...... as does most high quality cell phone ones. My understanding is you dont have to remove it from the charger..... it shows a full charge and shuts off with a light. Also recommends a charging process for stored machines.
 
I did notice one thing. I have all of mine attached to an ANKER 2.4 charger.... once all are fully charged i unplugged it. Then plugged it back in immediately....... the phones take 3 min to show charged again ...... the machine and WM08 dont show charged again for.....another 8 min.
 
its only one battery so it cant reverse polarise on a 2nd dead cell and the battery would have a protection circuit to stop it being drained to low and charged to high, so short answer is it should be ok to walk away from it but I wouldn't leave it on over night unless absolutely necessary.
 
Top