Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Battery. Holder
- Thread starter mrb1059
- Start date
NEBeachcomber
Member
If I recall correctly you need two 4-cell battery holders and a special Minelab circuit board (for the XS-2A) to connect the battery holders to.
Or you can try to rewire the detector to accept the two 4-cell battery holders using 9v battery connector cables?
-NEBeachcomber
Or you can try to rewire the detector to accept the two 4-cell battery holders using 9v battery connector cables?
-NEBeachcomber
Mike,welcome to the forum, do you have the rechargeable pack with this Sovereign?If you don't there is a very inexpensive and easy fix.Remove the pressure clip on your box and install the old plug in connector setup for the older Sovereigns.For most this will take about 15 minutes and about $8.00 in parts.The N size male plug for the control box is sold at most Radio Shacks and you will need the N female plug that will fit on your pigtail for the two alkaline packs.Rechargeable packs are easier to find with this setup and a much better battery connection.The N size male plug is the same size on the stock charger for the old Sovereigns and Excals.Good Luck Ron