Auto ground track on C$

[sandrailer]

So how long does the auto track on the C$ take to get a good ground balance if i cant find an area void of metal to do a GB at?Also does it work in disk mode?

 

[Anonymous]

here is the manual on the coin strike.
Click link then ground balance is on page 16 or 17
Hope this helps

Jeff

http://64.71.170.10/hobby/documents/CoinStrikeopman.pdf

 

[Jackpine Savage]

Auto tracking Gb works in all metal and disc, 4-5 full sweeps is all that is needed and it does not matter if some of the sweeps are over metal/iron. When I had the C$ I used tracking quite frequently to set the GB when working sites where it is nearly impossible to find a clean spot to balance. IMO iron performance is enhanced a bit if the detector sees some iron while using auto tracking to set the GB.


HH Tom

 

[sandrailer]

n/t