at pro headphone help?

[diggin4alivin]

Not new to dectecting wife bought me a atpro from bart for christmas i modified it so it would take
a regular headphone jack. you can plug it in under your arm at the rear of the mechine a couple of weeks ago
she also bought me a pair of origanal grey ghost headphones i love how they fit but i do not like the sound that
they make im looking for a set of headphones with the same or as close to the same sound as the headphones
that came with the atpro. that has a standard headphone jack i do not like the factory headphones plugged into the
front of the machine thanks for the help!!

 

[INVASCdigger]

I'm not sure if you can still buy them, but there's a headphone called "Duraphones" that I bought over 10 years ago. They're very similar to the Garrett stock phones. The great thing about the Duraphones is that if you get a short in the cable, just disconnect it (it's a coiled phone cable with typical clear plastic phone connectors at each end) and replace it with a new coiled phone cable. The 1/4" plug and connector plug in the left ear cup accepts a standard telephone clip, so it doesn't get much easier than that. I'd look on eBay, or you might call the store where I bought mine many years ago called Centreville Electronics in Manassas, VA...phone (703) 367-7999. I use mine with my AT Pro and love them.

 

[GoGoGopher]

The stock Garret phones look a lot like Audio 2000 phones sold by many Detecting Dealers...

HH,

 

[hammer0419]

I fully agree with you on the Grey Ghost headphones. I have very sensitive ears and I could just not tolerate the "TONE?" from them. Hard to explain. I guess I would say they are TO SHARP of a tone?? I sold them after one day and purchased a pair of KILLER B"S. ABSOLUTELY LOVE THEM.

 

[treasure dog]

Hammer, Do you use the Killer B's with the AT pro? I also have a set, they are great! I would like to use them with my AT but had to send the wire connector back. You move the wire and it keeps cutting in and out.
Joe.

 

[BigCatDaddy]

Since you already have the adapter hooed up and you like the Garrett 'phones, just get you a set of Garrett Master Sound headphones. Same exact 'phones as the ones that came with you AT Pro, but with a standard jack. Cost about $30...and then sell me those GG's....for a real reasonable price of course!!!

 

[hammer0419]

Hammer, Do you use the Killer B's with the AT pro? I also have a set, they are great! I would like to use them with my AT but had to send the wire connector back. You move the wire and it keeps cutting in and out.
Joe.

I would if I had one!!! Still savin for one. I have had my Killer B's for a good 5-6 years and they are still great. Hope to have a new AT Pro by the time spring arrives.